LME…UU european metric, closed/sealed family linear bearing for d = 5–80 mm. Built for round-shaft linear motion, with model-specific dimensions and load ratings selected from the supplied catalogue.
LME...UU is the european metric, closed/sealed family member of the catalogue linear-bearing range. The LME envelope is the European metric family, so a same-bore LM part can still have the wrong outside diameter or body length. The practical buying question is whether its envelope and mounting style match the shaft, housing and carriage already designed into the machine.
The supplied catalogue places this series on pages 41–42. The documented selection range is d = 5–80 mm. Rather than treating the series code as interchangeable with a similar-looking bushing, confirm the exact diameter family and the mounting geometry before an RFQ is released.
| Item | Documented Value | Why It Matters |
|---|---|---|
| Series | LME...UU | Catalogue family identifier |
| Design form | European metric, closed/sealed family | Mounting / envelope decision |
| Documented range | d = 5–80 mm | Use the exact model row for final dimensions |
| Key specification fields | model / dr / D / L / groove dimensions / tolerance / runout / clearance / C / Co / weight | Check drawing symbols and tolerance columns |
| Source | Catalogue pp. 41–42 | Supplied bearing catalogue / outline |
Catalogue note: The source provides model-by-model tables. This import row intentionally keeps the published family limits and field structure; final dimensions, C/Co ratings and mass must be taken from the selected catalogue model rather than inferred from a neighbouring size.
LME bearings are especially useful for European-origin automation and retrofit work where the housing was machined around the LME outside-diameter series.
They also appear in new equipment when the builder wants to standardise around the European metric envelope while retaining familiar closed, open and adjustable choices.
Measure both the shaft and housing bore. When an old marking is unreadable, those two dimensions plus body length and open/closed form are stronger identifiers than shaft diameter alone.
For supported rails or adjustable housings, include the required suffix and support-web geometry so the bearing is not forced into an incompatible shell.
Protect seals and ball tracks from burrs, and avoid clamping a split housing hard enough to ovalise the bearing.
If travel becomes uneven, inspect rail alignment and housing distortion before replacing a bushing that may only be reacting to installation error.
To check a catalogue model for your machine, send the series, shaft size, quantity, mounting details and operating conditions to sales@netherlandsdrive.com. Ever Power Netherlands Branch will confirm the applicable catalogue configuration before quotation.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
