LIN-01RT square-flange plastic linear-bearing series from the LIN plastic linear-bearing family. Designed for quiet, corrosion-resistant dry running; exact dimensions and load data remain model specific.
The square flange turns the dry-running LIN element into a bolt-on unit for flat carriage plates. The square flange turns a dry-running polymer bushing into a direct bolt-on carriage component, useful when a separate round housing would add parts and alignment steps.
For a flanged unit, the material limits remain the same as the cylindrical LIN family: 0.05–0.15 dry friction on steel and 0.4 N/mm²·m/s maximum PV. Temperature guidance in the outline is -50 to +90 °C for continuous work and -50 to +120 °C for short exposure.
| Check | Source Data | Engineering Use |
|---|---|---|
| Dry sliding coefficient | 0.05–0.15 against steel | Family material value |
| PV ceiling | 0.4 N/mm²·m/s | Combined pressure-speed limit |
| Material density | 1.48 g/cm³ | Published LIN material property |
| Temperature window | -50/+90 °C continuous; to +120 °C short | Check ambient and frictional heating |
| Source pages | 82–102 | Supplied linear-bearing catalogue |
| Series / form | LIN-01RT | square-flange plastic linear-bearing series |
| Key drawing fields | order code / shaft d / body D / flange dimensions / bolt pattern / length / C / Co / weight | Read the exact model row |
Data boundary: The figures above are published family properties. Exact dimensions, housing fits and load values for LIN-01RT stay model specific and should come from the selected catalogue row.
Square-flange polymer bearings work well on flat carriage plates, compact pick-and-place frames and food-related equipment where bolt-on service access is valuable.
For LIN-01RT, corrosion resistance and lubricant-free travel can simplify machine housekeeping. The catalogue also notes that the LIN material can be cleaned with disinfecting solution, which is useful context for equipment where oil migration would be undesirable.
Check the square flange width, bolt spacing and plate thickness before looking at load data. A correct bore with a mismatched bolt pattern is not a usable replacement.
After the geometry is identified, compare the real duty with the dry-running material limits. Record load, sliding speed, stroke, shaft finish and operating temperature in the RFQ so LIN-01RT is checked as a system rather than as a bore-size lookup.
Seat the square flange on a flat plate and tighten bolts crosswise. The polymer bearing should slide freely after the plate is torqued; if not, check plate flatness and shaft parallelism.
This family does not depend on scheduled grease replenishment. Inspection should instead look for abnormal clearance, embedded abrasive particles, heat and uneven wear; those symptoms often point to shaft or alignment issues around the LIN-01RT installation.
Send the LIN-01RT model if known, shaft size, quantity, mounting dimensions and duty conditions to sales@netherlandsdrive.com. Ever Power Netherlands Branch will use the supplied catalogue family as the technical reference for selection.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...