SSA is a standard duty corrosion resistant bearing inserts series for stainless insert selection for corrosion-sensitive housings and mounted units. The page keeps the complete catalogue drawing and model-by-model dimensional reference together for RFQ selection.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
SSA is a standard duty series configured around stainless steel bearing insert, narrow inner ring. Its catalogue definition uses eccentric locking, with individual bore and dimensional variants retained in one model table.
This series is organized as one catalogue-level product family rather than one product per bore size. That keeps RFQ work focused on the mounting form and locking method first, while the dimensional table remains available for the final unit selection.
This series sits within the wider bearing catalogue. Use the bearing index when comparing another housing format, then return here to verify the selected series drawing and dimensions. Browse related bearing families.
SSA is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
The primary configuration is stainless steel bearing insert, narrow inner ring, intended for stainless insert selection for corrosion-sensitive housings and mounted units.
Stainless steel insert; food-grade grease and silicon rubber seal stated in catalogue. Confirm the selected insert, seal, grease and cover arrangement for the actual cleaning or corrosion exposure.
Start with these family-level identifiers before reading across the dimensional table. They are the details most likely to distinguish a neighboring series with a similar overall appearance.
| Series | SSA |
|---|---|
| Catalogue Reference | Part B, page B135 |
| Product Family | Corrosion Resistant Bearing Inserts |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Eccentric locking |
| Inner Ring / Bore Form | Narrow inner ring |
| Housing / Configuration | stainless steel bearing insert, narrow inner ring |
| Material Note | Stainless steel insert; food-grade grease and silicon rubber seal stated in catalogue |
Read the drawing from the mounting interface inward. Check bolt or pilot geometry and shaft centerline first, then compare the remaining lettered dimensions with the same unit row in the catalogue table.
For washdown mounted units, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
SSA is relevant when food and packaging equipment requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
For corrosion-sensitive bearing housings, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Use this catalogue table for the final unit-number check. It preserves the source row order, dimensional columns and metric/inch alternatives on one reference image.
For new equipment, select the housing format before finalizing the shaft detail. For replacement work, reverse the process and measure the existing shaft and frame so the catalogue drawing can be matched directly. In this family, the intended role is stainless insert selection for corrosion-sensitive housings and mounted units.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | housing compatibility |
| 3 | locking method |
| 4 | seal, grease and cleaning requirements |
Before quotation, confirm the source row that matches the required shaft and housing dimensions. Any option not stated for that row should be treated as an RFQ item rather than assumed as standard.
Send the preferred unit number or shaft size with a drawing, quantity and mounting constraints. The catalogue page can then be used as a common reference during quotation. Ever Power Netherlands Branch can review the quotation basis against the same reference.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
