SSA Stainless Steel Insert Bearing Series
SSA is a standard duty series configured around stainless steel bearing insert, narrow inner ring. Its catalogue definition uses eccentric locking, with individual bore and dimensional variants retained in one model table.
Series Overview
This series is organized as one catalogue-level product family rather than one product per bore size. That keeps RFQ work focused on the mounting form and locking method first, while the dimensional table remains available for the final unit selection.
This series sits within the wider bearing catalogue. Use the bearing index when comparing another housing format, then return here to verify the selected series drawing and dimensions. Browse related bearing families.
Series-Level Selection
SSA is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is stainless steel bearing insert, narrow inner ring, intended for stainless insert selection for corrosion-sensitive housings and mounted units.
Environment
Stainless steel insert; food-grade grease and silicon rubber seal stated in catalogue. Confirm the selected insert, seal, grease and cover arrangement for the actual cleaning or corrosion exposure.
Technical Specifications
Start with these family-level identifiers before reading across the dimensional table. They are the details most likely to distinguish a neighboring series with a similar overall appearance.
| Series | SSA |
|---|---|
| Catalogue Reference | Part B, page B135 |
| Product Family | Corrosion Resistant Bearing Inserts |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Eccentric locking |
| Inner Ring / Bore Form | Narrow inner ring |
| Housing / Configuration | stainless steel bearing insert, narrow inner ring |
| Material Note | Stainless steel insert; food-grade grease and silicon rubber seal stated in catalogue |
Engineering Drawing
Read the drawing from the mounting interface inward. Check bolt or pilot geometry and shaft centerline first, then compare the remaining lettered dimensions with the same unit row in the catalogue table.
Applications
Washdown mounted units
For washdown mounted units, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Food and packaging equipment
SSA is relevant when food and packaging equipment requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Corrosion-sensitive bearing housings
For corrosion-sensitive bearing housings, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Catalogue Dimensional Data
Use this catalogue table for the final unit-number check. It preserves the source row order, dimensional columns and metric/inch alternatives on one reference image.
Selection & Integration
For new equipment, select the housing format before finalizing the shaft detail. For replacement work, reverse the process and measure the existing shaft and frame so the catalogue drawing can be matched directly. In this family, the intended role is stainless insert selection for corrosion-sensitive housings and mounted units.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | housing compatibility |
| 3 | locking method |
| 4 | seal, grease and cleaning requirements |
Before quotation, confirm the source row that matches the required shaft and housing dimensions. Any option not stated for that row should be treated as an RFQ item rather than assumed as standard.
RFQ Support
Confirm The Exact SSA Configuration
Send the preferred unit number or shaft size with a drawing, quantity and mounting constraints. The catalogue page can then be used as a common reference during quotation. Ever Power Netherlands Branch can review the quotation basis against the same reference.