SAPF200/SAPFT200 is a light duty stamped steel housed bearing units series for lightweight housed support using a stamped or pressed steel mounting form. The page keeps the complete catalogue drawing and model-by-model dimensional reference together for RFQ selection.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
SAPF200/SAPFT200 is a light duty series configured around pressed/stamped steel 3-bolt flange. Its catalogue definition uses setscrew / eccentric locking, with individual bore and dimensional variants retained in one model table.
This product page groups the complete catalogue series under one title. Engineers can compare the available unit numbers inside the dimensional reference instead of moving between many nearly identical SKU pages.
Series selection works best from the machine interface outward: mounting face, shaft, locking method and finally the exact catalogue line. Related bearing families can be compared from the main bearing index. Browse related bearing families.
SAPF200/SAPFT200 is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
The primary configuration is pressed/stamped steel 3-bolt flange, intended for lightweight housed support using a stamped or pressed steel mounting form.
The catalogue identifies setscrew / eccentric locking for this series; confirm the exact row before ordering.
Series attributes are separated from model dimensions here. This makes the page easier to scan while keeping the original line-by-line dimensional reference intact below.
| Series | SAPF200/SAPFT200 |
|---|---|
| Catalogue Reference | Part B, page B68 |
| Product Family | Stamped Steel Housed Bearing Units |
| Duty Classification | Light duty |
| Locking / Mounting Method | Setscrew / eccentric locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | pressed/stamped steel 3-bolt flange |
| Material Note | Stamped steel housing |
For replacement work, compare the drawing with the installed housing rather than relying on a familiar series code alone. Mounting dimensions and locking details are the better confirmation points.
SAPF200/SAPFT200 is relevant when light conveyors requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
For fans and compact equipment, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
SAPF200/SAPFT200 is relevant when low-mass machine assemblies requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Rather than shortening the model list, the page keeps the complete source table visible. This lets engineering and purchasing refer to the same row during selection and quotation.
Use the machine frame as the selection constraint. Confirm the fixed mounting dimensions and shaft first, then choose the series variant whose locking and housing form fit those conditions. In this family, the intended role is lightweight housed support using a stamped or pressed steel mounting form.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | mounting-hole pattern |
| 3 | locking method |
| 4 | environment and expected mounting rigidity |
For an RFQ, dimensions and configuration details are reviewed against the selected catalogue line item. Availability, material exceptions and application-specific options should be confirmed for the exact unit before an order is released.
Include the exact bore or unit suffix whenever possible. A photo of the installed housing and a few fixed mounting dimensions are useful when a legacy code is incomplete. Ever Power Netherlands Branch can review the quotation basis against the same reference.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
