SAPF200/SAPFT200 Stamped Steel Housed Bearing Units
SAPF200/SAPFT200 is a light duty series configured around pressed/stamped steel 3-bolt flange. Its catalogue definition uses setscrew / eccentric locking, with individual bore and dimensional variants retained in one model table.
Series Overview
This product page groups the complete catalogue series under one title. Engineers can compare the available unit numbers inside the dimensional reference instead of moving between many nearly identical SKU pages.
Series selection works best from the machine interface outward: mounting face, shaft, locking method and finally the exact catalogue line. Related bearing families can be compared from the main bearing index. Browse related bearing families.
Series-Level Selection
SAPF200/SAPFT200 is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is pressed/stamped steel 3-bolt flange, intended for lightweight housed support using a stamped or pressed steel mounting form.
Locking Logic
The catalogue identifies setscrew / eccentric locking for this series; confirm the exact row before ordering.
Technical Specifications
Series attributes are separated from model dimensions here. This makes the page easier to scan while keeping the original line-by-line dimensional reference intact below.
| Series | SAPF200/SAPFT200 |
|---|---|
| Catalogue Reference | Part B, page B68 |
| Product Family | Stamped Steel Housed Bearing Units |
| Duty Classification | Light duty |
| Locking / Mounting Method | Setscrew / eccentric locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | pressed/stamped steel 3-bolt flange |
| Material Note | Stamped steel housing |
Engineering Drawing
For replacement work, compare the drawing with the installed housing rather than relying on a familiar series code alone. Mounting dimensions and locking details are the better confirmation points.
Applications
Light conveyors
SAPF200/SAPFT200 is relevant when light conveyors requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Fans and compact equipment
For fans and compact equipment, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Low-mass machine assemblies
SAPF200/SAPFT200 is relevant when low-mass machine assemblies requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Catalogue Dimensional Data
Rather than shortening the model list, the page keeps the complete source table visible. This lets engineering and purchasing refer to the same row during selection and quotation.
Selection & Integration
Use the machine frame as the selection constraint. Confirm the fixed mounting dimensions and shaft first, then choose the series variant whose locking and housing form fit those conditions. In this family, the intended role is lightweight housed support using a stamped or pressed steel mounting form.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | mounting-hole pattern |
| 3 | locking method |
| 4 | environment and expected mounting rigidity |
For an RFQ, dimensions and configuration details are reviewed against the selected catalogue line item. Availability, material exceptions and application-specific options should be confirmed for the exact unit before an order is released.
RFQ Support
Confirm The Exact SAPF200/SAPFT200 Configuration
Include the exact bore or unit suffix whenever possible. A photo of the installed housing and a few fixed mounting dimensions are useful when a legacy code is incomplete. Ever Power Netherlands Branch can review the quotation basis against the same reference.