UCFC is a standard duty flange cartridge bearing units series for piloted or cartridge-style face support around a shaft opening. The page keeps the complete catalogue drawing and model-by-model dimensional reference together for RFQ selection.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
UCFC is a standard duty series configured around flange cartridge bearing units. Its catalogue definition uses setscrew locking, with individual bore and dimensional variants retained in one model table.
This series is organized as one catalogue-level product family rather than one product per bore size. That keeps RFQ work focused on the mounting form and locking method first, while the dimensional table remains available for the final unit selection.
This series sits within the wider bearing catalogue. Use the bearing index when comparing another housing format, then return here to verify the selected series drawing and dimensions. Browse related bearing families.
UCFC is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
The primary configuration is flange cartridge bearing units, intended for piloted or cartridge-style face support around a shaft opening.
The catalogue identifies setscrew locking for this series; confirm the exact row before ordering.
Series attributes are separated from model dimensions here. This makes the page easier to scan while keeping the original line-by-line dimensional reference intact below.
| Series | UCFC |
|---|---|
| Catalogue Reference | Part B, page B50 |
| Product Family | Flange Cartridge Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Setscrew locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | Flange Cartridge Bearing Units |
| Material Note | Material varies by unit; confirm selected model |
For replacement work, compare the drawing with the installed housing rather than relying on a familiar series code alone. Mounting dimensions and locking details are the better confirmation points.
UCFC is relevant when machine end plates requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
For conveyor and processing frames, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
UCFC is relevant when rotating equipment housings requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Below is the full dimensional reference for this series rather than a shortened web transcription. Keeping the table intact reduces the risk of separating a dimension from the wrong bore or unit suffix.
Selection should move from fixed machine dimensions to the bearing code: first the mounting interface, then shaft size, then locking method and environment. This avoids choosing a familiar-looking unit that does not match the frame. In this family, the intended role is piloted or cartridge-style face support around a shaft opening.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | cartridge pilot/fit geometry |
| 3 | bolt pattern |
| 4 | locking method and face clearance |
A practical selection review starts with geometry and locking method, then verifies the exact model row. Special coatings, covers, grease, seals or material options should only be treated as included when they are stated for the chosen configuration.
Include the exact bore or unit suffix whenever possible. A photo of the installed housing and a few fixed mounting dimensions are useful when a legacy code is incomplete. Ever Power Netherlands Branch can review the quotation basis against the same reference.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
