UKT+H is a standard duty take-up bearing units series for guided shaft support used where position adjustment or belt/chain tensioning is required. The page keeps the complete catalogue drawing and model-by-model dimensional reference together for RFQ selection.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
UKT+H is a standard duty series configured around take-up bearing units. Its catalogue definition uses adapter sleeve locking, with individual bore and dimensional variants retained in one model table.
The catalogue treats this as a distinct series, so the page below follows the same logic: choose the series by housing and locking arrangement, then match the exact unit number and dimensions in the supplied table.
If the machine layout is not fixed yet, compare this family with other mounted-bearing formats before choosing the model row. Housing geometry usually narrows the options faster than bore size alone. Browse related bearing families.
UKT+H is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
The primary configuration is take-up bearing units, intended for guided shaft support used where position adjustment or belt/chain tensioning is required.
The catalogue identifies adapter sleeve locking for this series; confirm the exact row before ordering.
Use these identifiers as the first selection gate. They capture the catalogue family, duty, locking and mounting form, while the numerical model rows remain grouped in the source table below.
| Series | UKT+H |
|---|---|
| Catalogue Reference | Part B, page B46 |
| Product Family | Take-Up Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Adapter sleeve locking |
| Inner Ring / Bore Form | Tapered bore |
| Housing / Configuration | Take-Up Bearing Units |
| Material Note | Material varies by unit; confirm selected model |
When replacing an installed unit, use the outline drawing as a dimensional fingerprint. Match the fixed machine dimensions before relying on a partially legible model code or a visually similar housing.
UKT+H is relevant when belt conveyor take-up positions requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
For bucket elevator or chain tensioning points, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
UKT+H is relevant when adjustable material-handling frames requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
The full table is preserved as a WebP reference so every unit code remains aligned with its dimension columns. Zoom the image when checking closely spaced metric and inch variants.
Where several series share a similar housing silhouette, the deciding details are usually locking method, duty class and one or two mounting dimensions. Verify those before comparing the remaining model rows. In this family, the intended role is guided shaft support used where position adjustment or belt/chain tensioning is required.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | take-up slot or guide geometry |
| 3 | required adjustment/travel position |
| 4 | locking method and lubrication access |
Use the catalogue page as the baseline and add project requirements separately. That keeps source-backed dimensions distinct from requested seals, covers, grease, materials or other options.
For a faster series check, include the installed unit code when available, plus shaft size, quantity and a photo or drawing of the mounting interface. Ever Power Netherlands Branch can review the quotation basis against the same reference.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
