UCPH is a standard duty tapped base pillow block bearing units series for compact shaft support where threaded mounting from the base is preferred. The page keeps the complete catalogue drawing and model-by-model dimensional reference together for RFQ selection.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
UCPH is a standard duty series configured around high-center pillow block housing. Its catalogue definition uses setscrew locking, with individual bore and dimensional variants retained in one model table.
The catalogue treats this as a distinct series, so the page below follows the same logic: choose the series by housing and locking arrangement, then match the exact unit number and dimensions in the supplied table.
If the machine layout is not fixed yet, compare this family with other mounted-bearing formats before choosing the model row. Housing geometry usually narrows the options faster than bore size alone. Browse related bearing families.
UCPH is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
The primary configuration is high-center pillow block housing, intended for compact shaft support where threaded mounting from the base is preferred.
The catalogue identifies setscrew locking for this series; confirm the exact row before ordering.
Use these identifiers as the first selection gate. They capture the catalogue family, duty, locking and mounting form, while the numerical model rows remain grouped in the source table below.
| Series | UCPH |
|---|---|
| Catalogue Reference | Part B, page B16 |
| Product Family | Tapped Base Pillow Block Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Setscrew locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | high-center pillow block housing |
| Material Note | Material varies by unit; confirm selected model |
When replacing an installed unit, use the outline drawing as a dimensional fingerprint. Match the fixed machine dimensions before relying on a partially legible model code or a visually similar housing.
UCPH is relevant when compact machine frames requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
For packaging and handling equipment, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
UCPH is relevant when equipment with limited access below the mounting surface requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Use this catalogue table for the final unit-number check. It preserves the source row order, dimensional columns and metric/inch alternatives on one reference image.
Begin with the machine mounting envelope, then confirm the shaft and locking arrangement. A similar series code does not guarantee the same center height, bolt pattern, cartridge fit, slot geometry or inner-ring dimensions. In this family, the intended role is compact shaft support where threaded mounting from the base is preferred.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | threaded base pattern |
| 3 | center height |
| 4 | locking method and service access |
Before quotation, confirm the source row that matches the required shaft and housing dimensions. Any option not stated for that row should be treated as an RFQ item rather than assumed as standard.
Send the current bearing designation and quantity if available. For a new design, provide shaft size and mounting geometry so the family can be checked before a specific unit number is proposed. Ever Power Netherlands Branch can review the quotation basis against the same reference.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
