SBPP200/SAPP200 is a light duty stamped steel housed bearing units series for lightweight housed support using a stamped or pressed steel mounting form. The page keeps the complete catalogue drawing and model-by-model dimensional reference together for RFQ selection.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
SBPP200/SAPP200 is a light duty series configured around pressed/stamped steel pillow block. Its catalogue definition uses setscrew / eccentric locking, with individual bore and dimensional variants retained in one model table.
The catalogue treats this as a distinct series, so the page below follows the same logic: choose the series by housing and locking arrangement, then match the exact unit number and dimensions in the supplied table.
If the machine layout is not fixed yet, compare this family with other mounted-bearing formats before choosing the model row. Housing geometry usually narrows the options faster than bore size alone. Browse related bearing families.
SBPP200/SAPP200 is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
The primary configuration is pressed/stamped steel pillow block, intended for lightweight housed support using a stamped or pressed steel mounting form.
The catalogue identifies setscrew / eccentric locking for this series; confirm the exact row before ordering.
The table below records the series-level facts visible in the supplied catalogue heading. Model-specific dimensions are deliberately kept in the original dimensional table so values are not detached from their unit numbers.
| Series | SBPP200/SAPP200 |
|---|---|
| Catalogue Reference | Part B, page B66 |
| Product Family | Stamped Steel Housed Bearing Units |
| Duty Classification | Light duty |
| Locking / Mounting Method | Setscrew / eccentric locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | pressed/stamped steel pillow block |
| Material Note | Stamped steel housing |
The drawing is placed directly before the dimensional reference because installation space is usually the quickest way to rule a series in or out. Match the drawing labels to the corresponding columns in the catalogue table before releasing an RFQ.
SBPP200/SAPP200 is relevant when light conveyors requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
For fans and compact equipment, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
SBPP200/SAPP200 is relevant when low-mass machine assemblies requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
The dimensional data is retained as one complete source table. This is especially useful when adjacent sizes share a housing but differ in shaft, inner-ring or mounting dimensions.
Selection should move from fixed machine dimensions to the bearing code: first the mounting interface, then shaft size, then locking method and environment. This avoids choosing a familiar-looking unit that does not match the frame. In this family, the intended role is lightweight housed support using a stamped or pressed steel mounting form.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | mounting-hole pattern |
| 3 | locking method |
| 4 | environment and expected mounting rigidity |
The model code should be verified together with its dimensional row. This is particularly important where metric and inch variants share similar housings but differ at the shaft interface.
If the existing code is uncertain, send the shaft size and mounting drawing instead. The series can be checked against the catalogue geometry before the quotation is finalized. Ever Power Netherlands Branch can review the quotation basis against the same reference.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
