SBPFL200/SAPFL200 is a light duty stamped steel housed bearing units series for lightweight housed support using a stamped or pressed steel mounting form. The page keeps the complete catalogue drawing and model-by-model dimensional reference together for RFQ selection.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
SBPFL200/SAPFL200 is a light duty series configured around pressed/stamped steel 2-bolt flange. Its catalogue definition uses setscrew / eccentric locking, with individual bore and dimensional variants retained in one model table.
For purchasing and replacement work, the useful decision is the series itself, not a separate web page for every shaft size. The model table therefore stays together so adjacent metric and inch variants can be compared in one place.
Treat the housing format and locking method as the first filter. The broader bearing range is useful when the same shaft size must be checked against another flange, pillow, take-up or insert arrangement. Browse related bearing families.
SBPFL200/SAPFL200 is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
The primary configuration is pressed/stamped steel 2-bolt flange, intended for lightweight housed support using a stamped or pressed steel mounting form.
The catalogue identifies setscrew / eccentric locking for this series; confirm the exact row before ordering.
These specifications describe the family, not a single bore size. Use them to confirm the housing and locking concept, then use the catalogue image for the exact dimensional row.
| Series | SBPFL200/SAPFL200 |
|---|---|
| Catalogue Reference | Part B, page B67 |
| Product Family | Stamped Steel Housed Bearing Units |
| Duty Classification | Light duty |
| Locking / Mounting Method | Setscrew / eccentric locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | pressed/stamped steel 2-bolt flange |
| Material Note | Stamped steel housing |
Check this outline against the machine frame before fixing the bore or unit number. The drawing shows the series geometry; the table below carries the model-by-model dimensions for the same family.
For light conveyors, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
SBPFL200/SAPFL200 is relevant when fans and compact equipment requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
For low-mass machine assemblies, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
The full table is preserved as a WebP reference so every unit code remains aligned with its dimension columns. Zoom the image when checking closely spaced metric and inch variants.
Check the dimensions that cannot change on the machine first. Once bolt pattern, centerline or pilot geometry and shaft size are known, the locking and environment details can be used to finish the selection. In this family, the intended role is lightweight housed support using a stamped or pressed steel mounting form.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | mounting-hole pattern |
| 3 | locking method |
| 4 | environment and expected mounting rigidity |
Use the catalogue page as the baseline and add project requirements separately. That keeps source-backed dimensions distinct from requested seals, covers, grease, materials or other options.
Share the catalogue unit you are considering plus quantity and the machine drawing. If the unit number is unknown, measured shaft and mounting dimensions can be used to narrow the series first. Ever Power Netherlands Branch can review the quotation basis against the same reference.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
