NAFC is a standard duty flange cartridge bearing units series for piloted or cartridge-style face support around a shaft opening. The page keeps the complete catalogue drawing and model-by-model dimensional reference together for RFQ selection.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
NAFC is a standard duty series configured around flange cartridge bearing units. Its catalogue definition uses eccentric locking, with individual bore and dimensional variants retained in one model table.
The catalogue treats this as a distinct series, so the page below follows the same logic: choose the series by housing and locking arrangement, then match the exact unit number and dimensions in the supplied table.
If the machine layout is not fixed yet, compare this family with other mounted-bearing formats before choosing the model row. Housing geometry usually narrows the options faster than bore size alone. Browse related bearing families.
NAFC is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
The primary configuration is flange cartridge bearing units, intended for piloted or cartridge-style face support around a shaft opening.
The catalogue identifies eccentric locking for this series; confirm the exact row before ordering.
Start with these family-level identifiers before reading across the dimensional table. They are the details most likely to distinguish a neighboring series with a similar overall appearance.
| Series | NAFC |
|---|---|
| Catalogue Reference | Part B, page B51 |
| Product Family | Flange Cartridge Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Eccentric locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | Flange Cartridge Bearing Units |
| Material Note | Material varies by unit; confirm selected model |
Read the drawing from the mounting interface inward. Check bolt or pilot geometry and shaft centerline first, then compare the remaining lettered dimensions with the same unit row in the catalogue table.
For machine end plates, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
NAFC is relevant when conveyor and processing frames requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
For rotating equipment housings, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Use this catalogue table for the final unit-number check. It preserves the source row order, dimensional columns and metric/inch alternatives on one reference image.
Check the dimensions that cannot change on the machine first. Once bolt pattern, centerline or pilot geometry and shaft size are known, the locking and environment details can be used to finish the selection. In this family, the intended role is piloted or cartridge-style face support around a shaft opening.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | cartridge pilot/fit geometry |
| 3 | bolt pattern |
| 4 | locking method and face clearance |
Before quotation, confirm the source row that matches the required shaft and housing dimensions. Any option not stated for that row should be treated as an RFQ item rather than assumed as standard.
Quotation review is more reliable when the request includes the model row, shaft size and installation drawing. Add any corrosion, cleaning or maintenance requirement that could change the configuration. Ever Power Netherlands Branch can review the quotation basis against the same reference.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
