SBFCT/SAFCT is a light duty 3-bolt flange bearing units series for face-mounted support where a three-bolt footprint suits the available plate geometry. The page keeps the complete catalogue drawing and model-by-model dimensional reference together for RFQ selection.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
SBFCT/SAFCT is a light duty series configured around ductile iron 3-bolt flange housing. Its catalogue definition uses setscrew / eccentric locking, with individual bore and dimensional variants retained in one model table.
This product page groups the complete catalogue series under one title. Engineers can compare the available unit numbers inside the dimensional reference instead of moving between many nearly identical SKU pages.
Series selection works best from the machine interface outward: mounting face, shaft, locking method and finally the exact catalogue line. Related bearing families can be compared from the main bearing index. Browse related bearing families.
SBFCT/SAFCT is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
The primary configuration is ductile iron 3-bolt flange housing, intended for face-mounted support where a three-bolt footprint suits the available plate geometry.
The catalogue identifies setscrew / eccentric locking for this series; confirm the exact row before ordering.
Use these identifiers as the first selection gate. They capture the catalogue family, duty, locking and mounting form, while the numerical model rows remain grouped in the source table below.
| Series | SBFCT/SAFCT |
|---|---|
| Catalogue Reference | Part B, page B28 |
| Product Family | 3-Bolt Flange Bearing Units |
| Duty Classification | Light duty |
| Locking / Mounting Method | Setscrew / eccentric locking |
| Inner Ring / Bore Form | Narrow inner ring |
| Housing / Configuration | ductile iron 3-bolt flange housing |
| Material Note | Ductile iron housing stated in catalogue |
When replacing an installed unit, use the outline drawing as a dimensional fingerprint. Match the fixed machine dimensions before relying on a partially legible model code or a visually similar housing.
SBFCT/SAFCT is relevant when compact machine frames requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
For light conveyors, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
SBFCT/SAFCT is relevant when packaging and process equipment requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
The original model table is shown at high resolution so metric and inch unit numbers remain attached to the correct drawing-letter dimensions. Select the row visually and confirm it again in the RFQ.
Use the machine frame as the selection constraint. Confirm the fixed mounting dimensions and shaft first, then choose the series variant whose locking and housing form fit those conditions. In this family, the intended role is face-mounted support where a three-bolt footprint suits the available plate geometry.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | three-bolt pattern |
| 3 | flange orientation |
| 4 | locking method and available mounting area |
The supplied catalogue is used here as the technical selection reference. Final quotation review should confirm the exact model, shaft size, mounting interface and any environment-specific requirement.
For a faster series check, include the installed unit code when available, plus shaft size, quantity and a photo or drawing of the mounting interface. Ever Power Netherlands Branch can review the quotation basis against the same reference.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
