SBFCT/SAFCT 3-Bolt Flange Bearing Units
SBFCT/SAFCT is a light duty series configured around ductile iron 3-bolt flange housing. Its catalogue definition uses setscrew / eccentric locking, with individual bore and dimensional variants retained in one model table.
Series Overview
This product page groups the complete catalogue series under one title. Engineers can compare the available unit numbers inside the dimensional reference instead of moving between many nearly identical SKU pages.
Series selection works best from the machine interface outward: mounting face, shaft, locking method and finally the exact catalogue line. Related bearing families can be compared from the main bearing index. Browse related bearing families.
Series-Level Selection
SBFCT/SAFCT is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is ductile iron 3-bolt flange housing, intended for face-mounted support where a three-bolt footprint suits the available plate geometry.
Locking Logic
The catalogue identifies setscrew / eccentric locking for this series; confirm the exact row before ordering.
Technical Specifications
Use these identifiers as the first selection gate. They capture the catalogue family, duty, locking and mounting form, while the numerical model rows remain grouped in the source table below.
| Series | SBFCT/SAFCT |
|---|---|
| Catalogue Reference | Part B, page B28 |
| Product Family | 3-Bolt Flange Bearing Units |
| Duty Classification | Light duty |
| Locking / Mounting Method | Setscrew / eccentric locking |
| Inner Ring / Bore Form | Narrow inner ring |
| Housing / Configuration | ductile iron 3-bolt flange housing |
| Material Note | Ductile iron housing stated in catalogue |
Engineering Drawing
When replacing an installed unit, use the outline drawing as a dimensional fingerprint. Match the fixed machine dimensions before relying on a partially legible model code or a visually similar housing.
Applications
Compact machine frames
SBFCT/SAFCT is relevant when compact machine frames requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Light conveyors
For light conveyors, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Packaging and process equipment
SBFCT/SAFCT is relevant when packaging and process equipment requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Catalogue Dimensional Data
The original model table is shown at high resolution so metric and inch unit numbers remain attached to the correct drawing-letter dimensions. Select the row visually and confirm it again in the RFQ.
Selection & Integration
Use the machine frame as the selection constraint. Confirm the fixed mounting dimensions and shaft first, then choose the series variant whose locking and housing form fit those conditions. In this family, the intended role is face-mounted support where a three-bolt footprint suits the available plate geometry.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | three-bolt pattern |
| 3 | flange orientation |
| 4 | locking method and available mounting area |
The supplied catalogue is used here as the technical selection reference. Final quotation review should confirm the exact model, shaft size, mounting interface and any environment-specific requirement.
RFQ Support
Confirm The Exact SBFCT/SAFCT Configuration
For a faster series check, include the installed unit code when available, plus shaft size, quantity and a photo or drawing of the mounting interface. Ever Power Netherlands Branch can review the quotation basis against the same reference.