LIN-02RFL long flanged lin-02r family from the LIN plastic linear-bearing family. Designed for quiet, corrosion-resistant dry running; exact dimensions and load data remain model specific.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
LIN-02RFL extends the flanged bearing body for applications that need more axial support than a short flanged polymer unit. The extended flanged body increases support length, so this version is selected as much for carriage stability as for its dry-running material.
Longer support does not raise the material PV ceiling. The catalogue retains a maximum value of 0.4 N/mm²·m/s, so pressure and travel speed must be checked together. For thermal screening, keep steady duty within -50/+90 °C. The +120 °C upper figure belongs to brief exposure, not continuous operation.
| Check | Source Data | Engineering Use |
|---|---|---|
| Key drawing fields | order code / shaft d / body D / extended L / flange dimensions / bolt pattern / C / Co / weight | Read the exact model row |
| Dry sliding coefficient | 0.05–0.15 against steel | Family material value |
| PV ceiling | 0.4 N/mm²·m/s | Combined pressure-speed limit |
| Material density | 1.48 g/cm³ | Published LIN material property |
| Temperature window | -50/+90 °C continuous; to +120 °C short | Check ambient and frictional heating |
| Source pages | 82–102 | Supplied linear-bearing catalogue |
| Series / form | LIN-02RFL | long flanged LIN-02R family |
Data boundary: The figures above are published family properties. Exact dimensions, housing fits and load values for LIN-02RFL stay model specific and should come from the selected catalogue row.
Long-flange units are useful on taller carriages or slides exposed to pitch moments, provided the shaft support and mounting plate are stiff enough to make use of the added bearing length.
For LIN-02RFL, corrosion resistance and lubricant-free travel can simplify machine housekeeping. The catalogue also notes that the LIN material can be cleaned with disinfecting solution, which is useful context for equipment where oil migration would be undesirable.
For RFL, verify that the extended body fits the carriage depth and that the flange can seat flat. The longer support should solve a stiffness need, not create interference behind the plate.
After the geometry is identified, compare the real duty with the dry-running material limits. Record load, sliding speed, stroke, shaft finish and operating temperature in the RFQ so LIN-02RFL is checked as a system rather than as a bore-size lookup.
A long body magnifies coaxiality errors. Run the carriage through the complete stroke after tightening and correct alignment before the polymer develops a one-sided wear pattern.
This family does not depend on scheduled grease replenishment. Inspection should instead look for abnormal clearance, embedded abrasive particles, heat and uneven wear; those symptoms often point to shaft or alignment issues around the LIN-02RFL installation.
Send the LIN-02RFL model if known, shaft size, quantity, mounting dimensions and duty conditions to sales@netherlandsdrive.com. Ever Power Netherlands Branch will use the supplied catalogue family as the technical reference for selection.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
