TP-SSBLF is a standard duty thermoplastic bearing units series for corrosion-resistant mounted support using thermoplastic housings. The page keeps the complete catalogue drawing and model-by-model dimensional reference together for RFQ selection.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
TP-SSBLF is a standard duty series configured around thermoplastic 2-bolt flange. Its catalogue definition uses setscrew locking, with individual bore and dimensional variants retained in one model table.
The catalogue treats this as a distinct series, so the page below follows the same logic: choose the series by housing and locking arrangement, then match the exact unit number and dimensions in the supplied table.
If the machine layout is not fixed yet, compare this family with other mounted-bearing formats before choosing the model row. Housing geometry usually narrows the options faster than bore size alone. Browse related bearing families.
TP-SSBLF is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
The primary configuration is thermoplastic 2-bolt flange, intended for corrosion-resistant mounted support using thermoplastic housings.
Thermoplastic housing; stainless steel insert where stated in catalogue. Confirm the selected insert, seal, grease and cover arrangement for the actual cleaning or corrosion exposure.
These specifications describe the family, not a single bore size. Use them to confirm the housing and locking concept, then use the catalogue image for the exact dimensional row.
| Series | TP-SSBLF |
|---|---|
| Catalogue Reference | Part B, page B91 |
| Product Family | Thermoplastic Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Setscrew locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | thermoplastic 2-bolt flange |
| Material Note | Thermoplastic housing; stainless steel insert where stated in catalogue |
Check this outline against the machine frame before fixing the bore or unit number. The drawing shows the series geometry; the table below carries the model-by-model dimensions for the same family.
For food and beverage handling equipment, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
TP-SSBLF is relevant when washdown-prone conveyors requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
For packaging and processing machinery, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
The original model table is shown at high resolution so metric and inch unit numbers remain attached to the correct drawing-letter dimensions. Select the row visually and confirm it again in the RFQ.
Check the dimensions that cannot change on the machine first. Once bolt pattern, centerline or pilot geometry and shaft size are known, the locking and environment details can be used to finish the selection. In this family, the intended role is corrosion-resistant mounted support using thermoplastic housings.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | housing footprint |
| 3 | locking method |
| 4 | cleaning environment, cover and grease requirements |
The supplied catalogue is used here as the technical selection reference. Final quotation review should confirm the exact model, shaft size, mounting interface and any environment-specific requirement.
For a faster series check, include the installed unit code when available, plus shaft size, quantity and a photo or drawing of the mounting interface. Ever Power Netherlands Branch can review the quotation basis against the same reference.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
