UEFB is a standard duty 3-bolt flange bearing units series for face-mounted support where a three-bolt footprint suits the available plate geometry. The page keeps the complete catalogue drawing and model-by-model dimensional reference together for RFQ selection.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
UEFB is a standard duty series configured around flange bracket. Its catalogue definition uses concentric locking, with individual bore and dimensional variants retained in one model table.
For purchasing and replacement work, the useful decision is the series itself, not a separate web page for every shaft size. The model table therefore stays together so adjacent metric and inch variants can be compared in one place.
Treat the housing format and locking method as the first filter. The broader bearing range is useful when the same shaft size must be checked against another flange, pillow, take-up or insert arrangement. Browse related bearing families.
UEFB is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
The primary configuration is flange bracket, intended for face-mounted support where a three-bolt footprint suits the available plate geometry.
The catalogue identifies concentric locking for this series; confirm the exact row before ordering.
Start with these family-level identifiers before reading across the dimensional table. They are the details most likely to distinguish a neighboring series with a similar overall appearance.
| Series | UEFB |
|---|---|
| Catalogue Reference | Part B, page B27 |
| Product Family | 3-Bolt Flange Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Concentric locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | flange bracket |
| Material Note | Material varies by unit; confirm selected model |
Read the drawing from the mounting interface inward. Check bolt or pilot geometry and shaft centerline first, then compare the remaining lettered dimensions with the same unit row in the catalogue table.
For compact machine frames, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
UEFB is relevant when light conveyors requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
For packaging and process equipment, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
All catalogue rows for this family remain together below. Check the chosen bore or accessory code against the drawing letters, then include that exact unit designation in the RFQ.
Check the dimensions that cannot change on the machine first. Once bolt pattern, centerline or pilot geometry and shaft size are known, the locking and environment details can be used to finish the selection. In this family, the intended role is face-mounted support where a three-bolt footprint suits the available plate geometry.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | three-bolt pattern |
| 3 | flange orientation |
| 4 | locking method and available mounting area |
Series nomenclature helps narrow the choice, but the final check should be made against the model row and installation data. This avoids treating a nearby bore size or housing variant as interchangeable without verification.
Send the preferred unit number or shaft size with a drawing, quantity and mounting constraints. The catalogue page can then be used as a common reference during quotation. Ever Power Netherlands Branch can review the quotation basis against the same reference.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
