UCHA Series Hanger Bearing Units

This series addresses a familiar bearing-unit question: the shaft support is suspended from above or integrated into a hanger structure rather than mounted on a base plate. In the supplied catalog, UCHA Series is shown as hanger bearing unit with set screw type and suspended/hanger housing. For UCHA Series, quotation work moves faster when the source designation, shaft or bore dimension and the controlling mounting measurements are checked before optional seal, grease or housing requests are discussed.

Product Role

Its main job is not merely to reduce friction; it must also hold the intended shaft line relative to the mounting surface. For this UCHA Series family, the drawing should be treated as the interchange reference because the suspended/hanger housing governs where the shaft centerline actually sits.

Construction & Fit

The drawing indicates the dimensional chain that has to remain compatible during replacement. For UCHA Series, that chain includes set screw type at the shaft and suspended/hanger housing at the machine. The UCHA Series support should sit naturally on the machine. Pulling the UCHA Series unit into position with bolts can consume whatever alignment tolerance its bearing arrangement provides.

Applications

Representative machinery includes screw conveyors, suspended shafts, material-handling equipment and machine frames with overhead bearing supports. For UCHA Series, a compact installation that blocks removal tools or grease access may create unnecessary maintenance time later.

Engineering Review

UCHA hanger units support a shaft from a suspended or overhead structure, so the mounting stud or hanger interface carries the weight and reaction differently from a base-mounted pillow block. Measure the shaft center relative to the hanger connection and verify that the supporting member can accept the cataloged geometry. A similar bearing insert in a different housing does not reproduce the same load path.

Access is often the difficult part of a hanger installation. Note whether the locking device and lubrication point can be reached from a platform or service side after the unit is installed. During replacement, support the shaft so the hanger is not carrying uncontrolled weight while fasteners are removed. Photos that show the full suspension arrangement help engineering review far more than an isolated product image.

For hanger units, inspect the suspension point for bending, thread damage or elongated holes before focusing on the bearing. The support above the unit controls where the shaft centerline sits. During shutdown, temporarily support the shaft and then check whether the hanger returns to a neutral position. If it springs sideways, the surrounding structure may be preloading the bearing. Include that observation with the replacement request.

Measure from the hanger attachment to a fixed structural datum on both sides of the machine when two suspended supports share a shaft. Unequal values can reveal a support problem before the bearing is replaced. Keeping this simple geometry in the maintenance record makes later UCHA alignment checks repeatable instead of subjective.

Technical Specifications

Dimensional Data

Core UCHA Series dimensions are transcribed below for faster comparison. Do not treat the reduced UCHA Series table as a replacement for the source drawing; use the gallery specification image to verify the final model and any omitted columns.

Selection Notes

The buyer should first identify what the machine physically constrains. The UCHA Series selection record should include shaft size, the machine-side suspended/hanger housing dimensions, and the exact set screw type arrangement. For UCHA Series, add speed, load direction, operating hours and contamination notes so the quotation is based on duty as well as geometry.

Mounting & Integration

Establish the hanger centerline from the shaft rather than from the surrounding sheet metal, secure the support, check vertical and lateral alignment, and lock the insert only after the shaft turns freely. The main installation hazard for UCHA Series is that hanger alignment is sensitive to structural deflection; a bearing that aligns correctly when empty may shift when the supported equipment is loaded. The last mechanical check for UCHA Series is simple: confirm free movement and make sure the assembly was not pulled out of alignment by final bolt torque.

Maintenance & Inspection

Inspect the hanger attachment as part of the bearing check because structural movement can mimic a bearing problem; keep the grease path accessible from the service side. Service decisions for UCHA Series should follow observed duty: high contamination or washdown may justify shorter inspection intervals even when operating hours are low.

Customization & RFQ

For UCHA Series, combine model identification with measured geometry instead of relying on an image search or a shortened part number. For UCHA Series, also state whether the location sees washdown, dust, fertilizer, food-process cleaning, corrosive chemicals or unusual temperature. Ever Power Netherlands Branch can then review options for UCHA Series against the supplied application instead of presenting unverified material, seal or grease claims as standard catalog facts.

Cataloged Models

Cataloged references covered here are UCHA200-series hanger units shown in the catalog. For UCHA Series, retain the exact suffix, bore form and related housing reference from the source when the goal is a drop-in replacement.

Product FAQ

Evidence Note

This UCHA Series record uses the supplied PDF as its specification source; where a value is not clear in that scan, the page asks for confirmation instead of filling the gap from a generic table. The gallery drawing for UCHA Series is a direct catalog crop, not an AI-generated technical illustration. Any application visualization added later for UCHA Series should be treated as illustrative rather than as dimensional evidence.

Product facts for UCHA Series stay tied to PDF page 41; when the scan does not support a specification, the enquiry asks for confirmation instead of borrowing a number from another manufacturer's table.