LIN-01RS lin-01rs cylindrical series from the LIN plastic linear-bearing family. Designed for quiet, corrosion-resistant dry running; exact dimensions and load data remain model specific.
LIN-01RS is a distinct catalogue cylindrical configuration; keep its order code tied to its own drawing rather than substituting an adjacent LIN-01R size. The RS suffix marks a separate catalogue configuration. Procurement should keep the full designation intact because adjacent LIN families can share a shaft size while using different outside dimensions.
The published material data should be read as operating guidance, not a guaranteed machine result: dry-steel friction is 0.05–0.15 and maximum PV is 0.4 N/mm²·m/s. The published thermal window allows continuous use from -50 °C through +90 °C; +120 °C is listed only for short-duration exposure.
| Check | Source Data | Engineering Use |
|---|---|---|
| Dry sliding coefficient | 0.05–0.15 against steel | Family material value |
| PV ceiling | 0.4 N/mm²·m/s | Combined pressure-speed limit |
| Material density | 1.48 g/cm³ | Published LIN material property |
| Temperature window | -50/+90 °C continuous; to +120 °C short | Check ambient and frictional heating |
| Source pages | 82–102 | Supplied linear-bearing catalogue |
| Series / form | LIN-01RS | LIN-01RS cylindrical series |
| Key drawing fields | order code / shaft d / outside dimensions / length / housing fit / C / Co / weight | Read the exact model row |
Data boundary: The figures above are published family properties. Exact dimensions, housing fits and load values for LIN-01RS stay model specific and should come from the selected catalogue row.
RS-series cylinders can be used in clean mechanisms, test fixtures and low-noise slides where the exact RS housing dimensions are already established.
For LIN-01RS, corrosion resistance and lubricant-free travel can simplify machine housekeeping. The catalogue also notes that the LIN material can be cleaned with disinfecting solution, which is useful context for equipment where oil migration would be undesirable.
Keep the RS suffix in the RFQ and attach the old-part dimensions when replacing an installed unit. The full series designation prevents a visually similar cylindrical part from being selected by mistake.
After the geometry is identified, compare the real duty with the dry-running material limits. Record load, sliding speed, stroke, shaft finish and operating temperature in the RFQ so LIN-01RS is checked as a system rather than as a bore-size lookup.
Install the RS cylinder square to the shaft datum. A wear band concentrated on one side is a useful warning that the housing or shaft is no longer aligned.
This family does not depend on scheduled grease replenishment. Inspection should instead look for abnormal clearance, embedded abrasive particles, heat and uneven wear; those symptoms often point to shaft or alignment issues around the LIN-01RS installation.
Send the LIN-01RS model if known, shaft size, quantity, mounting dimensions and duty conditions to sales@netherlandsdrive.com. Ever Power Netherlands Branch will use the supplied catalogue family as the technical reference for selection.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
