E4NN3K514AB: 14.0 ml/rev, 130 bar, anticlockwise (CCW). Flexible MOQ by model and order value; 1–2 pcs can be considered at a higher unit price.
The E4NN3K514AB entry pairs 14 ml/rev with a 130 bar limit, between the 90 bar and 225 bar offerings shown nearby. Its 17.0 L/min controlled-flow figure is separately listed; it is not a promise of unrestricted outlet flow at every shaft speed. Confirm relief-valve setting and the actual tractor pump drive.
Reference E4NN3K514AB appears with this Ford pump. On older tractor hydraulics, a casting number and a service part number may not be the same, so send both if visible.
No specific tractor serial ranges are established here for E4NN3K514AB. Use the parts manual and existing hardware to complete the application check.
| Reference / model | E4NN3K514AB |
|---|---|
| Product type | Tractor Hydraulic Gear Pump |
| Original reference numbers | E4NN3K514AB; 83960261 |
| Applicable tractor models | Confirm from original pump / equipment parts list |
| Manufacturer reference | Not provided |
| Nominal displacement | 14.0 ml/rev |
| Maximum pressure | 130 bar |
| Rotational speed | 500–3200 rpm |
| Controlled flow rate | 17.0 L/min |
| Feed hole / connection | 3/4-16 UNF |
| Discharge hole / connection | 9/16-18 UNF |
| Rotation | anticlockwise (CCW) |
Ford E6NN3K514AB can serve as a useful control example while sorting this catalogue family. Its 225 bar listing should not be transferred to E4NN3K514AB, for which the recorded value is 130 bar.
Do not infer a warranty of interchangeability from an OEM number appearing in a search list.
The model is listed at 14.0 ml/rev, with a maximum pressure of 130 bar. The displacement gives geometric delivery per revolution; installed output depends on shaft speed and volumetric efficiency.
Within the comparison set, E6NN3K514AB lists 14.0 ml/rev and 225 bar. That is a useful limit check for the E4NN3K514AB hydraulic request, not permission to alter the tractor’s original pump rating.
A separate controlled-flow line gives 17.0 L/min. Keep that figure distinct from an estimated geometric delivery based on displacement.
The stated speed is 500–3200 rpm. Before commissioning, verify the engine accessory drive ratio and that normal operating conditions do not exceed this listing.
Inspect the hydraulic reservoir and filter when changing to E4NN3K514AB. Recording the original failure symptoms and checking a blocked feed line may prevent an immediate second failure.
A repair should be assessed against the 130 bar pressure entry and the 500–3200 rpm operating-speed specification, not simply whether the pump produces movement.
Even a correct cross-reference can fail if the drive turns the wrong way. The E4NN3K514AB listing indicates counterclockwise, so trace the machine’s drive direction before use.
The feed and discharge entries are 3/4-16 UNF and 9/16-18 UNF. Establish whether each is a plain port, a thread or a connection requiring a separate sealing element.
Drive rotationCCW
Displacement14.0 ml/rev
Connection check3/4-16 UNF / 9/16-18 UNF
For E4NN3K514AB, the most useful RFQ attachments are a shaft-end image, a drawing of the fastening pattern and the existing hose connector specification.
If different pump types are required in one shipment, show quantities separately so the mixed-order arrangement can be priced correctly.
No; the part number helps with identification, but the shaft, sealing face, ports and CCW rotation need checking.
The comparison shows 14.0 ml/rev for the other part and 14.0 ml/rev here; rotation and mechanical interfaces must also be checked.
Order quantities are set according to pump type and total order value. A small order of 1–2 pieces can be considered at a higher unit price; new customers may request 1–5 samples when the item is suitable. Mixed-model orders are available, normally with a combined order value of approximately USD 1,500.
Typical production schedules are 10–25 working days for standard items, 20–45 working days for customized components, and 45–120 working days for project equipment. Usual delivery terms are EXW, FOB, CIF and DAP. FCA, CFR, CPT, CIP and DDP can be discussed for specific shipments. Confirm the final schedule and terms with the quotation.
Third-party brand names and trademarks are used only for product identification and cross-reference. They remain the property of their respective owners; such references do not imply affiliation, sponsorship, authorization or endorsement.
Send the old pump reference, quantity, photos and interface measurements to our sales team.
sales@netherlandsdrive.com
| OEM |
|---|
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
