041682T1 / 22 cc: 22 ml/rev, 250 bar, clockwise (CW). Flexible MOQ by model and order value; 1–2 pcs can be considered at a higher unit price.
The 22 ml/rev Massey Ferguson unit referenced by 041682T1 is rated 250 bar and 250–2500 rpm. A G1 feed connection and 7/8-24 UNF 2B discharge make its plumbing very different from the smaller MF series. Verify the full coupling and mounting dimensions before specifying hose adapters.
The catalogue associates this assembly with 041682T1. It is a sourcing reference rather than a controlled installation drawing, so no unlisted dimensions are presumed.
No specific tractor serial ranges are established here for 041682T1 / 22 cc. Use the parts manual and existing hardware to complete the application check.
| Reference / model | 041682T1 / 22 cc |
|---|---|
| Product type | Tractor Hydraulic Gear Pump |
| Original reference numbers | 041682T1; 041683T2 |
| Applicable tractor models | Confirm from original pump / equipment parts list |
| Manufacturer reference | Not provided |
| Nominal displacement | 22 ml/rev |
| Maximum pressure | 250 bar |
| Rotational speed | 250–2500 rpm |
| Controlled flow rate | Not stated |
| Feed hole / connection | G1 |
| Discharge hole / connection | 7/8-24 UNF 2B |
| Rotation | clockwise (CW) |
Rotation is specified as clockwise for 041682T1 / 22 cc. The sign of this dimension is decisive even when the housing and gear-drive arrangement appear nearly identical.
The feed port is shown as G1; the discharge port as 7/8-24 UNF 2B. Confirm the fitting seat and whether the opening is measured as a bore or a thread.
Drive rotationCW
Displacement22 ml/rev
Connection checkG1 / 7/8-24 UNF 2B
The 22 ml/rev figure represents swept volume, not a constant litres-per-minute delivery. For a correct substitute, ask whether the hydraulic equipment was designed around the same shaft-speed band.
Within the comparison set, MF375 lists 6.2 ml/rev and 175 bar. That is a useful limit check for the 041682T1 / 22 cc hydraulic request, not permission to alter the tractor’s original pump rating.
Flow-control behavior is not defined by this parts entry. Confirm the tractor valve and circuit characteristics independently.
The stated speed is 250–2500 rpm. Before commissioning, verify the engine accessory drive ratio and that normal operating conditions do not exceed this listing.
Cleanliness is particularly important while servicing 041682T1 / 22 cc. Keep the hydraulic ports capped and check for swarf or grit in the suction line; contamination can damage a replacement before its first working cycle.
Correct relief protection and uncontaminated oil matter more than the appearance of the replacement housing.
The adjacent Massey Ferguson MF375 part has direction CCW, while 041682T1 / 22 cc is CW. Rotation is a hard constraint even if two supplier listings show comparable capacities.
Wrong-hand selection is a frequent avoidable risk when several variants share an external form.
Quote the complete cross-reference 041682T1 and include the existing pump’s mounting view. If there is an unusual fitting, supply a close-up with a ruler or a thread gauge reading.
Please highlight any change from the original connection standard to avoid quotation assumptions.
It is better to provide the original pump marking and photos, especially when a tractor has had earlier repairs or modifications.
No controlled-flow entry is printed for this product.
Order quantities are set according to pump type and total order value. A small order of 1–2 pieces can be considered at a higher unit price; new customers may request 1–5 samples when the item is suitable. Mixed-model orders are available, normally with a combined order value of approximately USD 1,500.
Typical production schedules are 10–25 working days for standard items, 20–45 working days for customized components, and 45–120 working days for project equipment. Usual delivery terms are EXW, FOB, CIF and DAP. FCA, CFR, CPT, CIP and DDP can be discussed for specific shipments. Confirm the final schedule and terms with the quotation.
Third-party brand names and trademarks are used only for product identification and cross-reference. They remain the property of their respective owners; such references do not imply affiliation, sponsorship, authorization or endorsement.
Send the old pump reference, quantity, photos and interface measurements to our sales team.
sales@netherlandsdrive.com
| OEM |
|---|
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
