UEFT is a standard duty 2-bolt flange bearing units series for compact face mounting with a two-bolt flange footprint. The page keeps the complete catalogue drawing and model-by-model dimensional reference together for RFQ selection.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
UEFT is a standard duty series configured around 2-bolt flange bearing units. Its catalogue definition uses concentric locking, with individual bore and dimensional variants retained in one model table.
For purchasing and replacement work, the useful decision is the series itself, not a separate web page for every shaft size. The model table therefore stays together so adjacent metric and inch variants can be compared in one place.
Treat the housing format and locking method as the first filter. The broader bearing range is useful when the same shaft size must be checked against another flange, pillow, take-up or insert arrangement. Browse related bearing families.
UEFT is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
The primary configuration is 2-bolt flange bearing units, intended for compact face mounting with a two-bolt flange footprint.
The catalogue identifies concentric locking for this series; confirm the exact row before ordering.
These specifications describe the family, not a single bore size. Use them to confirm the housing and locking concept, then use the catalogue image for the exact dimensional row.
| Series | UEFT |
|---|---|
| Catalogue Reference | Part B, page B37 |
| Product Family | 2-Bolt Flange Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Concentric locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | 2-Bolt Flange Bearing Units |
| Material Note | Material varies by unit; confirm selected model |
Check this outline against the machine frame before fixing the bore or unit number. The drawing shows the series geometry; the table below carries the model-by-model dimensions for the same family.
For conveyors and small handling systems, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
UEFT is relevant when packaging machinery requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
For general industrial frames, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Use this catalogue table for the final unit-number check. It preserves the source row order, dimensional columns and metric/inch alternatives on one reference image.
A replacement should be checked against measurable interfaces, not appearance alone. Record the shaft size, mounting pattern, centerline or pilot dimensions and the method used to secure the bearing to the shaft. In this family, the intended role is compact face mounting with a two-bolt flange footprint.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | two-bolt spacing |
| 3 | housing orientation |
| 4 | locking method and shaft alignment |
Before quotation, confirm the source row that matches the required shaft and housing dimensions. Any option not stated for that row should be treated as an RFQ item rather than assumed as standard.
For a faster series check, include the installed unit code when available, plus shaft size, quantity and a photo or drawing of the mounting interface. Ever Power Netherlands Branch can review the quotation basis against the same reference.
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
