LMEF and LMEK bearings bring flange mounting to the European metric LME dimensional family. They are useful when a machine must retain an existing European bearing envelope but the designer wants a bolt-on carriage interface instead of a separate cylindrical housing.
The supplied outline identifies LMEF as the round-flange version and LMEK as the square-flange version, with bores from 8 to 60 mm. The technical table follows the same field structure as LMF/LMK but uses European outside dimensions, so a same-bore LMF should not be substituted without checking the drawing.
Key Features
Technical Specifications
| Series | Flange Shape | Bore Range | Dimensional Standard | Key Checks | Typical Decision |
|---|---|---|---|---|---|
| LMEF…UU | Round | 8–60 mm | European metric | D, L, PCD, hole size, C/Co | Symmetric flange layout |
| LMEK…UU | Square | 8–60 mm | European metric | D, L, square envelope, hole pitch, C/Co | Rectangular carriage plate |
Catalogue note: Use the European LMEF/LMEK table for the exact outside diameter and bolt pattern. A same-bore LMF/LMK can use a different body size.
Typical Applications
These bearings fit European-format automation modules, packaging machines, assembly stations and replacement projects where existing carriage plates already follow LMEF/LMEK geometry.
They are especially convenient when the axis needs occasional service access: the flange can be unbolted from the carriage face without removing a separate retaining ring or bearing sleeve.
Selection Guide
Identify whether the current mounting plate expects a round or square flange, then measure the hole pattern. Match the shaft bore only after the flange geometry is confirmed. This prevents the common retrofit error of ordering an Asian-format flange bearing that fits the shaft but not the plate.
For higher loads or longer carriage support, compare the extended LMEFC/LMEKC family rather than simply stacking two standard flanged bearings.
Installation & Maintenance
Install against a flat shoulder and tighten the flange bolts in a balanced sequence. Verify free travel after final torque.
Keep the linear shaft clean and correctly lubricated for the chosen bearing. A replacement bearing should not be used to compensate for a scored shaft or misaligned support structure.
Related Products
FAQ
What makes LMEF/LMEK European?
What is the bore range?
Can LMEF replace LMF directly?
Which flange is round?
Request a Quote
Send the old part number or flange dimensions so the European-format mounting pattern can be checked before quotation.
Send the model or shaft size, quantity, application, expected load and available drawing to sales@netherlandsdrive.com. Ever Power Netherlands Branch will use those inputs to confirm the appropriate catalogue configuration before quotation.