5600 / 6600 / 7700: clockwise (CW); reference and mounting details need confirmation. Flexible MOQ by model and order value; 1–2 pcs can be considered at a higher unit price.
The catalogue groups several of the 5600 and 7700-generation Ford tractor references under this pump. Because multiple numbers are attached to one pictured unit, begin a replacement order with the stamping on the removed pump; a tractor name alone may not establish the mounting variant. The direction is clockwise, but a displacement figure is not printed for this entry.
Use 83908242 as the initial parts-search term for 5600 / 6600 / 7700. A cross-reference only narrows the candidate list; the sealing face, drive shaft and oil connections must agree with the machine being repaired.
The listed tractor applications include 5600, 6600, 6700, 7600, 7700. Confirm the exact tractor build and its previously fitted pump, especially when several series names share one catalogue row.
| Reference / model | 5600 / 6600 / 7700 |
|---|---|
| Product type | Tractor Hydraulic Gear Pump |
| Original reference numbers | 83908242; 83908244; 83926102; 83936586; 87540837; D3NN600D; D5NN600D; D6NN600D; D6NN600F; D8NN600KA; D8NN600KB |
| Applicable tractor models | 5600, 6600, 6700, 7600, 7700 |
| Manufacturer reference | Not provided |
| Nominal displacement | Not stated — confirm from original unit |
| Maximum pressure | Not stated — confirm |
| Rotational speed | Not stated — confirm |
| Controlled flow rate | Not stated |
| Feed hole / connection | Not stated — measure |
| Discharge hole / connection | Not stated — measure |
| Rotation | clockwise (CW) |
The reference number for 5600 / 6600 / 7700 is shown, but pressure and speed values are absent. Those missing fields should be stated openly rather than copied from another part in the Ford group.
Until the displaced volume for 5600 / 6600 / 7700 is documented, a parts quotation should refer to the exact reference 83908242, the pump drive and the application. A neighboring catalogue row cannot fill the missing capacity or pressure fields.
There is no controlled-flow figure in this entry. A system drawing is needed if a regulated or priority hydraulic flow function is involved.
There is no published shaft-speed band; do not assign a maximum rpm without an original specification.
Rotation is specified as clockwise for 5600 / 6600 / 7700. The sign of this dimension is decisive even when the housing and gear-drive arrangement appear nearly identical.
A parts drawing should confirm the supply-side opening (unavailable) and the pressure-side opening (unavailable) with their centerline positions.
Drive rotationCW
DisplacementRequest rated data
Connection checkUnlisted / Unlisted
As a sanity check, compare this entry with Ford 5000 / 5100 / 5200. A near-identical picture is weaker evidence than distinct OEM numbers, connection shapes and the stated CW rotation.
Wrong-hand selection is a frequent avoidable risk when several variants share an external form.
Cleanliness is particularly important while servicing 5600 / 6600 / 7700. Keep the hydraulic ports capped and check for swarf or grit in the suction line; contamination can damage a replacement before its first working cycle.
Before releasing the tractor to service, inspect both connections for seepage under the manufacturer’s safe checking procedure.
Quote the complete cross-reference 83908242 and include the existing pump’s mounting view. If there is an unusual fitting, supply a close-up with a ruler or a thread gauge reading.
State whether you need one qualification unit before authorizing a production lot.
Compare the original identification marking with 83908242 and measure the drive connection before selecting a replacement.
The nominal displacement is missing here and must be obtained before estimating output.
Order quantities are set according to pump type and total order value. A small order of 1–2 pieces can be considered at a higher unit price; new customers may request 1–5 samples when the item is suitable. Mixed-model orders are available, normally with a combined order value of approximately USD 1,500.
Typical production schedules are 10–25 working days for standard items, 20–45 working days for customized components, and 45–120 working days for project equipment. Usual delivery terms are EXW, FOB, CIF and DAP. FCA, CFR, CPT, CIP and DDP can be discussed for specific shipments. Confirm the final schedule and terms with the quotation.
Third-party brand names and trademarks are used only for product identification and cross-reference. They remain the property of their respective owners; such references do not imply affiliation, sponsorship, authorization or endorsement.
Send the old pump reference, quantity, photos and interface measurements to our sales team.
sales@netherlandsdrive.com
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
