5000 / 5100 / 5200: clockwise (CW); reference and mounting details need confirmation. Flexible MOQ by model and order value; 1–2 pcs can be considered at a higher unit price.
This early Ford entry covers the 5000, 5100 and 5200 family alongside 7000-series applications. It is better identified by the 81823983 cross-reference and gear-drive arrangement than by a guessed pressure rating. Ask for a straight-on flange image and the tooth/shaft style before choosing a substitute.
An enquiry for 5000 / 5100 / 5200 should include the complete identifier, not a truncated family number. The corresponding Ford hydraulic component must also be checked against the machine’s mounting arrangement.
The listed tractor applications include 5000, 5100, 5200, 7000, 7100, 7200. Confirm the exact tractor build and its previously fitted pump, especially when several series names share one catalogue row.
| Reference / model | 5000 / 5100 / 5200 |
|---|---|
| Product type | Tractor Hydraulic Gear Pump |
| Original reference numbers | 81823983; 87540836; D0NN600G |
| Applicable tractor models | 5000, 5100, 5200, 7000, 7100, 7200 |
| Manufacturer reference | Not provided |
| Nominal displacement | Not stated — confirm from original unit |
| Maximum pressure | Not stated — confirm |
| Rotational speed | Not stated — confirm |
| Controlled flow rate | Not stated |
| Feed hole / connection | Not stated — measure |
| Discharge hole / connection | Not stated — measure |
| Rotation | clockwise (CW) |
Rotation is specified as clockwise for 5000 / 5100 / 5200. The sign of this dimension is decisive even when the housing and gear-drive arrangement appear nearly identical.
Unlisted and unlisted are the recorded feed/discharge connection values. A mistaken swap between inlet and pressure ports should be resolved on the bench.
Drive rotationCW
DisplacementRequest rated data
Connection checkUnlisted / Unlisted
The available entry identifies the part and its clockwise direction, not its hydraulic output. A capacity estimate based on tractor model or housing size must not be used as a substitute for manufacturer data.
Until the displaced volume for 5000 / 5100 / 5200 is documented, a parts quotation should refer to the exact reference 81823983, the pump drive and the application. A neighboring catalogue row cannot fill the missing capacity or pressure fields.
Flow-control behavior is not defined by this parts entry. Confirm the tractor valve and circuit characteristics independently.
There is no published shaft-speed band; do not assign a maximum rpm without an original specification.
Cleanliness is particularly important while servicing 5000 / 5100 / 5200. Keep the hydraulic ports capped and check for swarf or grit in the suction line; contamination can damage a replacement before its first working cycle.
An incorrectly seated shaft coupling may damage both drive and pump even at light load.
One comparison point is Ford 83957379, where the record shows no displacement ml/rev and no pressure entry. The present 5000 / 5100 / 5200 specification (displacement not stated ml/rev, pressure not stated) should be kept separate.
Wrong-hand selection is a frequent avoidable risk when several variants share an external form.
Quote the complete cross-reference 81823983 and include the existing pump’s mounting view. If there is an unusual fitting, supply a close-up with a ruler or a thread gauge reading.
Replacement evaluations can proceed faster when photographs show all sides rather than only the top cover.
Only after confirming the actual port thread or bore, sealing system and clearance. Do not assume an adapter makes a mechanically wrong pump correct.
The listed supply/discharge values (unknown and unknown) do not describe the full gasket, thread seat or bolt pattern.
Order quantities are set according to pump type and total order value. A small order of 1–2 pieces can be considered at a higher unit price; new customers may request 1–5 samples when the item is suitable. Mixed-model orders are available, normally with a combined order value of approximately USD 1,500.
Typical production schedules are 10–25 working days for standard items, 20–45 working days for customized components, and 45–120 working days for project equipment. Usual delivery terms are EXW, FOB, CIF and DAP. FCA, CFR, CPT, CIP and DDP can be discussed for specific shipments. Confirm the final schedule and terms with the quotation.
Third-party brand names and trademarks are used only for product identification and cross-reference. They remain the property of their respective owners; such references do not imply affiliation, sponsorship, authorization or endorsement.
Send the old pump reference, quantity, photos and interface measurements to our sales team.
sales@netherlandsdrive.com
| OEM |
|---|
Stainless steel gearboxes are widely used in industrial transmission fields due to their high strength and corrosion resistance. However, in actual use, stainless steel gearboxes may still malfunction due to improper design, installation, lubrication or maintenance....
In modern logistics automation systems, the CC600 Crate Conveyor Chain in Amsterdam plays a crucial role. With the continuous development of warehousing and sorting technologies, enterprises have increasingly higher requirements for the stability, efficiency and...
This article mainly explains and analyzes the structural design characteristics of the sprocket based on its role in the scraper conveyor, thereby leading to the necessity of researching the material and processing technology of the sprocket and the key technical...
