by ep | Dec 22, 2017 | NEWS
Gear, by a very basic definition is the machinery or device in a vehicle that regulates the power of its engine. However, the modern and sophisticated industrial gears have surpassed the conventional gears, both in application and scope. Today, the gears are used in a...
by ep | Dec 22, 2017 | NEWS
Spur Gear is a device that transfers force to another device via rotation mechanism. The spur gear with the aid of its teeth is joined with another gear and applies full force. According to its mechanism a gear has the capacity to enhance force at various torques...
by ep | Dec 22, 2017 | NEWS
V-belts are widely used in machinery. The cross-section of the standardization V-belt appears trapezoidal, and the whole ring without joint. The v-belts can be classfied as O, A, B, C, D, E type, the sectional area is gradually increasing from O-type to E-tpye....
by ep | Dec 22, 2017 | NEWS
The sprockets can be classified into these two types: the drive sprocket and the driven sprocket. The drive sprocket is mounted on the output shaft of the engine through the form of a splined, and the driven sprocket mounted on a motorcycle drive wheel through the...
by ep | Dec 22, 2017 | NEWS
Drive sprocket Installation requirements: according to the models specifications the select the right drive sprocket model.check the installation position of drive sprocket(transmission output of auxiliary shaft, wheel hub, etc.) and make sure they are in good...
by ep | Dec 22, 2017 | NEWS
How to install the pulley 1. Check the pulley groove, to ensure that no injuries or sharp edges, all dimensions are in line with the standards; 2. Clean all parts surface, such as a pulley hub bore,...
EN 
NL 
DE 
FR 
FY 
PL 
TR 
AR