Additional Features:
Made of Steel
For use with cast iron bushed bore pulley
This U1 Bushing with 5-1/2″ bore is a high-quality precision product that's built for sturdiness and strength. U1 bushings are used in an extensively wide selection of applications, which include; sprockets, shaves, pulleys, gears, plus much more, we also offer most of these goods. What units this bushing apart may be the high-quality steel structure along with precise manufacturing and top quality control; this ensures that you always get a premium quality consistent product. What really sets us in addition to the other fellas is our experienced expert staff members and our company-wide aim of customer satisfaction.
1. Be certain the tapered cone surfaces of the bushing and the inside of the driven product happen to be clean and free of anti-seize lubricants.
2. Place the bushing in sprocket or different component type that accepts the bushing.
3. Place cap screws loosely in pull-up holes. The bushing remains loose to make sure sliding in shape on 
shaft.
4. With important on shaft, slide the sprocket or other portion type to the desired placement on the shaft. Make sure to keep the heads of the cap screws accessible.
5. Align the sprocket or portion type, tighten the screws on the other hand and progressively until they are pulled up tight. Usually do not employ extensions on the wrench handles and do not permit the sprocket or part to always be drawn i connection with flange of bushing. At this time there must be a gap between the bushing flange and sprocket, make sure this gap does not close.
Double split barrel ensures concentricity
Grips the shaft with confident clamp fit
High torque carrying capacity
Permits blind assembly
Load not carried or limited by mounting screws
External key of all sizes for great drive and higher torque carrying capabilities
Double-split barrel for great clamping
Solid flange to keep concentric bores
Available in inch, metric, and spline bores. Bore range between 3/8″ to 10″
Solid Flange & Dual Split Barrel – Assures better concentricity to the shaft.
Key to Key Travel – With keys on both shaft and item to supply the strongest possible drive.
3/4″ per Foot Taper on Barrel – Personal locking taper supplies the highest amount of mechanical locking item to product.
Taper bushing are trusted as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made from high quality engineered supplies with wonderful tolerance. The characteristic is easy to work with and needs no extra alteration. These bushings can fit almost all types of assemblies and sizes. They are the best choice in style for mechanical connections.
To complete designations put bore size. For example: PD1215X16MM designates a 1215 taper bushing with a 16mm bore.
No Split Taper Bushing china costly re-boring: total range of both metric and imperial available.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete brief reach range offered, for compact compact assemblies & Clean, Compact Design.
Simple installation and removal.
This Split Taper Bushing was created exclusively for use with cast iron bushed bore pulleys and can be purchased on the same page as the pulley you need.
For use with 1 3/16” shaft sizes.
Includes 2 set screws.