Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric motor, capacitor and quickness control change is still hooked up nevertheless the cord itself is generally detached as observed in the photos. (Discover “Control Notice” below for change type.)
T (See “Program Notice” below for utilize in various other applications.)
Dimensions: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” long with a collection screw clean. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take notice: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). These two types of switches both control the engine just as (but you have a rotating knob and you have a pull-chain). In the event that you order several engine at a time, we can do our better to supply your purchase with each one kind of control or the excess.
Application Note: USUALLY DO NOT use this electric engine in a nonfan program. This is a totally enclosed fan electric motor and made to have continuous ventilation over the engine casing for cooling. The casing isn’t vented and the electrical electric motor will overheat and get into automated thermal Electric Fan Motor overload if operate in a nonfan system where there isn’t solid ventilation past the electric motor. (Caution Note: the electric motor will restart instantly when it cools back off.) Using this electric motor for applications apart from 18 & 24″ TPI fans may possibly also overload the electric motor and lead it to proceed into automatic thermal overload. (Your lover blade from another manufacturer may have a steeper blade position.)
Origin: This electric motor is manufactured 
in China.