Hanging Pulleys for Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to aid with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and deal with systems. They require about 50 % the force of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Acetal, nylon, and aluminum are lightweight and corrosion resistant. Stainless may be the most corrosion resistant.
Styles C, D, and J possess a bracket on the bottom for tying off a single end of a rope.
Style K decrease the force needed to keep your load set up. Unlike regular pulleys, these possess a V-groove for more grasp on your rope, plus they ratchet when under load so they don’t slip in the additional direction. Pulley for3/8″ dia. rope could be established to ratchet even though not under load.
Mounted Pulleys for Rope-For Horizontal Pulling
Attach these pulleys to a flat surface to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Aluminum and nylon are light-weight and corrosion resistant. Stainless gets the most corrosion resistance.
Pulleys for Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to aid with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Acetal and aluminum are light-weight and corrosion resistant. Galvanized steel is definitely more corrosion resistant than iron and steel. Stainless steel is the most corrosion resistant.
Easy-Open up Hanging Pulleys for Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open so it is simpler to feed the rope through the housing-a totally free rope end is not needed. Use them to aid with horizontal pulling or to guide a rope.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Aluminum is more lightweight than stainless steel. Stainless is certainly more corrosion resistant than light weight aluminum.
Pulleys for Wire Rope-For Horizontal Pulling
Also known as sheaves, use these pulleys to assist with horizontal pulling or even to guide a rope.
Pulleys with a bearing are simpler to switch than pulleys without a bearing.
Acetal and nylon are lightweight and corrosion resistant. Stainless steel is the most corrosion resistant.
Mounted Pulleys for Wire Rope-For Horizontal Pulling
Attach these pulleys to a set surface to aid with horizontal pulling or to guide 
a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as block and tackle systems. They require about 50 % the power of a single-groove pulley to go the same load.
Pulleys with a bearing are easier to convert than pulleys with out a bearing.
Stainless steel is certainly more corrosion resistant than steel.
Hanging Pulleys for Wire Rope-For Horizontal Pulling
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or even to guide a rope.
Pulleys with two grooves are for use where multiple pulleys move a single load, such as for example block and tackle systems. They require about half the drive of a single-groove pulley to move the same load. They have a bracket on the bottom for tying off one end of your wire rope.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Nylon is lighter in weight than metal. Aluminum is certainly corrosion resistant. Stainless is the most corrosion resistant.
Pulley with carabiner may mount to metal framing or hang as part of your rigging system.
Easy-Open up Hanging Pulleys for Wire Rope-For Horizontal Pulling
Also known as snatch blocks, these pulleys open therefore it’s simpler to feed the rope through the housing-a free rope end is not needed. Use them to assist with horizontal pulling or even to guide a rope.
Style D pulleys have a corrosion-resistant stainless steel housing.
Pulleys for Wire Rope-For Lifting
Utilize the bore to mount these pulleys on a shaft. These pulleys are also called sheaves.
Pulleys with a bearing are simpler to switch than pulleys with out a bearing.
Nylon pulleys are much lighter than steel pulleys.
Warning: Never use to lift people or products over people.
Mounted Pulleys for Wire Rope-For Lifting
Install these pulleys to a set surface.
Pulleys with two grooves are for use in applications where multiple pulleys move an individual load, such as for example block and deal with systems.They can reduce the force had a need to move the strain by up to 2 times in comparison to single-groove pulleys.
Pulleys with a bearing are easier to change than pulleys without a bearing.
Stainless steel pulleys are more corrosion resistant that steel.
Style 3 pivots up to 200° for different pull directions.
Warning: Never use to lift people or items over people.
Hanging Pulleys for Wire Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as block and tackle systems. They require about half the pressure of a single-groove pulley to move the same load.
Pulleys with a bearing are easier to convert than pulleys without a bearing.
Style Electronic pulleys have bracket upon the bottom that lets you tie off one end of your wire rope.
Warning: Never make use of to lift people or items over people.
Easy-Open Hanging Pulleys for Wire Rope-For Lifting
Also called snatch blocks, these pulleys open therefore it’seasier to feed the rope through the housing-a free rope end is not needed.
Pulleys with two grooves are for use where multiple pulleys move an individual load, such as block and deal with systems. They require about 50 % the push of a single-groove pulley to move the same load.
Latch kits (sold separately) add a latch to the swiveling hook on Style C to keep rope secure.
Warning: Never make use of to lift people or items over people
Hanging Pulleys to get Rope-For Lifting
Hang these pulleys from hooks, screws, and bolts.
Pulleys with two grooves are used in applications where multiple pulleys move an individual load, such as for example block and tackle systems. They can reduce the force had a need to move the strain by up to 2 times in comparison to single-groove pulleys.
Pulleys with a bearing are easier to switch than pulleys with out a bearing.
Style A pulleys possess a bracket on underneath for tying off 1 end of a rope.
Warning: Never use to lift people or products over people.
Easy-Open up Hanging Pulleys for Rope-For Lifting
Also called snatch blocks, these pulleys open so it is simpler to feed the rope through the housing-a free rope end isn’t needed.
Warning: Never make use of to lift people or products over people.
