Single and dual reduction planetary gear drives to be used with electric, hydraulic, atmosphere motors or mechanical power insight from high swiftness, low torque sources 
to deliver decreased speeds at increased torques. The input part has regular SAE pads for motor mounting. Available in the three result configurations proven below. Many units could be furnished with an integral Plastic Gear Rack parking brake.
Single reduction drives are limited to 3500 RPM input; double reduction drives to 5000 RPM. Units with integral parking input speed is bound to 2500 RPM.The same torque is available in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque rankings to about 1/3 to 1/2 the values shown. Models provide 95% power transmission efficiency.
Wheel Drive
Input side has regular SAE pads and splined input. Output side has hub for mounting automobile wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature is usually standard on all wheel drives.
Shaft Output
Input side standard SAE pads with splined input. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is standard SAE pads with splined input. Output side includes a flanged spindle for coupling to the load.
Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel provides extra-large tapered roller bearings, a ductile iron hub and heat treated ring equipment to minimize backlash growth caused by wear. The external bearing nut supplies the greatest in shaft retention and shaft power. Output could be a spindle shaft or numerous sizes of integral pinion gears.