Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, taken off unused 18” or 24” China Surroundings Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric motor, capacitor and quickness control change is still hooked up however the cord itself is normally detached as seen in the photos. (Discover “Control Notice” below for alter type.)
T (See “Application Notice” below for make use of in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is½” (0.500″) diameter x 2 ½” long with a collection screw smooth. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually have got 4mm threads and to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electrical motor) is Clockwise.
Control Take notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you possess a rotating knob and you possess a pull-chain). In the event that you order several engine at a time, we will do our better to supply your order with each one kind of control or the excess.
Application Note: Do NOT use this electric engine in a nonfan application. 
This is a totally enclosed fan electric electric motor and designed to have constant ventilation over the engine casing for cooling. The casing isn’t vented and the electric powered engine will overheat and enter automated thermal overload if operate in a nonfan program where there isn’t strong ventilation past the motor. (Caution Note: the electrical motor will electric fan motor china restart instantly when it cools back off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans may possibly also overload the engine and lead it to proceed into automated thermal overload. (Your companion blade from another manufacturer may have a steeper blade position.)
Origin: This electric electric motor is produced in China.