2.0 MPa • 3000 rpm • Not specified rotation
YH30H-05000 is a forklift fuel-feed pump with nominal displacement 14 ml/rev, a listed pressure of 2.0 MPa and a speed reference of 3000 rpm.
Product overview & application
This pump belongs to the forklift fuel-supply path rather than the truck's hydraulic lifting circuit. A fuel-feed unit must be matched to the engine and fluid requirements, not compared with a 25 MPa hydraulic working pump.
Unlike the hydraulic lift/steering gear pumps, YH30H-05000 is a forklift fuel-feed pump. Its specified 14 ml/rev and 2.0 MPa belong to a fuel-supply role, not a high-pressure hydraulic lifting circuit.
Fuel feed
Confirm fuel specification and the original system layout.
Low-pressure role
The listed rating is 2.0 MPa rather than the 24.5–25 MPa of forklift hydraulic working pumps.
Connection check
Identify inlet/outlet fittings, drive shaft and rotation from the unit being replaced.
Fuel feed system function
Confirm the fuel medium, drive arrangement, sealing compatibility, suction/discharge fittings and rotation using the engine fuel-system documentation.
Fuel pickup
Supply from the specified fuel circuit and suction fittings.
Delivery
Feed the downstream engine fuel-system component at the required duty.
Matching
Verify media, seals and interface details before ordering.
Model range & comparison
Compare nearby pump references by actual hydraulic figures first. Connection geometry and pump drive arrangement still need to be matched independently.
| Model | Displacement | Pressure | Speed | Rotation |
|---|---|---|---|---|
| YH30H-05000 | 14 ml/rev | 2.0 MPa | 3000 rpm | Not specified |
| CBHZG-F34-AL13L | 34 ml/rev | 25 MPa | 3000 rpm | Counterclockwise |
| CBFZ-F32ALK1X | 32 ml/rev | 25 MPa | 3000 rpm | Counterclockwise |
Technical specifications
| Product reference | YH30H-05000 |
|---|---|
| Pump application | Forklift Fuel Feed Pump |
| Nominal displacement | 14 ml/rev |
| Listed maximum pressure | 2.0 MPa |
| Speed reference | 3000 rpm |
| Rotation direction | Not specified |
| Inlet / suction connection | Not specified |
| Outlet / discharge connection | Not specified |
| Typical application | forklift engine fuel-supply equipment |
| Mounting/shaft drawing | Confirm dimensions and drawing availability for the ordered configuration |
| Supplier | Ever Power Netherlands Branch |
Confirm fuel compatibility, engine-side drive and system pressure for this fuel-feed duty.
Interfaces, installation & maintenance
The nominal 14 ml/rev displacement and 2.0 MPa limit apply to a fuel-feed duty. This unit must not be substituted for a hydraulic lift pump. Match fuel compatibility and the engine-side connections using the existing unit or service drawing.
Fuel-system compatibility
Confirm the permitted fuel, seals and original engine documentation. Do not use hydraulic-system oil recommendations for this fuel-feed pump.
Mounting and priming
Compare drive interface, hose fittings and flow direction; follow the engine maker's priming and leak-test instructions.
Commissioning
Check for leakage and stable fuel delivery before returning the engine to service.
OEM cross-reference & replacement checks
Use the original pump marking for identification, then compare the shaft, flange, port layout, rotation and hydraulic duty. OEM reference numbers help start a cross-check; they do not by themselves establish one-to-one interchangeability.
| Reference to compare | YH30H-05000 |
|---|---|
| Hydraulic figures | 14 ml/rev; 2.0 MPa; 3000 rpm |
| Rotation check | Not specified |
| Physical check | Drive end, flange, ports, clearance and mounting hole centres |
| Documents for confirmation | Nameplate or OEM reference, photos, dimensioned drawing where available |
Frequently asked questions
Is YH30H-05000 suitable for hydraulic lift circuits?
No. It is identified as a forklift fuel-feed pump; hydraulic working pumps have a different duty and pressure envelope.
Which fuels and seals are approved?
Confirm the engine fuel type and sealing requirements for the ordered configuration using the original equipment drawing.
What is the listed speed?
3000 rpm; the rotation direction is not specified in the available model data and must be checked before ordering.
Which details help confirm a replacement?
Provide the fuel pump nameplate, inlet/outlet connections, drive-end image, engine reference and intended quantity.
Ordering, samples & delivery
Minimum order quantity (MOQ) is assessed by pump type, specification and total order value. Where production conditions allow, orders of just 1–2 units can be quoted, although the unit price will usually be higher than for a batch order.
Samples and small lots
New customers may request 1–5 samples when suitable. Availability and sample pricing are confirmed for the selected model.
Mixed-model orders
Different hydraulic pump models may be combined in one order; the target combined order value is approximately USD 1,500.
Production schedule
Standard parts: 10–25 working days. Customized assemblies: 20–45 working days. Project equipment: 45–120 working days.
Trade terms: EXW, FOB, CIF and DAP are normally available. FCA, CFR, CPT, CIP and DDP can be discussed according to the destination and shipment requirements. The agreed lead time and Incoterm will be stated in the formal quotation.
Related hydraulic pump selection
For a different forklift pump duty, see CBHZ-F31.5-ALH6L (a hydraulic working pump). Fuel-feed and hydraulic lifting pumps are not interchangeable.
For YH30H-05000, send the required quantity, the equipment model, an existing part number, shaft and port photos, and any available dimension drawing. Contact Ever Power Netherlands Branch at sales@netherlandsdrive.com.