UP/UFL Silver Series Bearing Units
UP/UFL is a series-specific series configured around silver series bearing units. Its catalogue definition uses setscrew / eccentric locking, with individual bore and dimensional variants retained in one model table.
Series Overview
The catalogue treats this as a distinct series, so the page below follows the same logic: choose the series by housing and locking arrangement, then match the exact unit number and dimensions in the supplied table.
If the machine layout is not fixed yet, compare this family with other mounted-bearing formats before choosing the model row. Housing geometry usually narrows the options faster than bore size alone. Browse related bearing families.
Series-Level Selection
UP/UFL is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is silver series bearing units, intended for compact mounted bearing support for light and general machinery.
Locking Logic
The catalogue identifies setscrew / eccentric locking for this series; confirm the exact row before ordering.
Technical Specifications
This summary deliberately avoids copying isolated dimensions out of context. Family attributes are shown here, and the exact model dimensions stay attached to their original unit numbers in the catalogue reference.
| Series | UP/UFL |
|---|---|
| Catalogue Reference | Part B, page B71 |
| Product Family | Silver Series Bearing Units |
| Duty Classification | Series-specific |
| Locking / Mounting Method | Setscrew / eccentric locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | Silver Series Bearing Units |
| Material Note | Material varies by unit; confirm selected model |
Engineering Drawing
Use the drawing to confirm the mounting envelope before choosing the line item from the catalogue table. Pay particular attention to the shaft centerline, bolt or pilot geometry, overall housing envelope and the dimensions that affect adjacent machine parts.
Applications
Small conveyors
For small conveyors, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Compact machinery
UP/UFL is relevant when compact machinery requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Light-duty rotating assemblies
For light-duty rotating assemblies, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Catalogue Dimensional Data
Below is the full dimensional reference for this series rather than a shortened web transcription. Keeping the table intact reduces the risk of separating a dimension from the wrong bore or unit suffix.
Selection & Integration
For new equipment, select the housing format before finalizing the shaft detail. For replacement work, reverse the process and measure the existing shaft and frame so the catalogue drawing can be matched directly. In this family, the intended role is compact mounted bearing support for light and general machinery.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | housing footprint |
| 3 | locking method |
| 4 | clearance around the unit |
A practical selection review starts with geometry and locking method, then verifies the exact model row. Special coatings, covers, grease, seals or material options should only be treated as included when they are stated for the chosen configuration.
RFQ Support
Confirm The Exact UP/UFL Configuration
Attach the machine or housing drawing with the required quantity and shaft size. This gives the technical review a clear basis for matching the catalogue row without guessing from the series name alone. Ever Power Netherlands Branch can review the quotation basis against the same reference.