UEP Pillow Block Bearing Units
UEP is a standard duty series configured around pillow block bearing units. Its catalogue definition uses concentric locking, with individual bore and dimensional variants retained in one model table.
Series Overview
This product page groups the complete catalogue series under one title. Engineers can compare the available unit numbers inside the dimensional reference instead of moving between many nearly identical SKU pages.
Series selection works best from the machine interface outward: mounting face, shaft, locking method and finally the exact catalogue line. Related bearing families can be compared from the main bearing index. Browse related bearing families.
Series-Level Selection
UEP is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is pillow block bearing units, intended for shaft support on a base parallel to the shaft axis.
Locking Logic
The catalogue identifies concentric locking for this series; confirm the exact row before ordering.
Technical Specifications
Start with these family-level identifiers before reading across the dimensional table. They are the details most likely to distinguish a neighboring series with a similar overall appearance.
| Series | UEP |
|---|---|
| Catalogue Reference | Part B, page B3 |
| Product Family | Pillow Block Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Concentric locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | Pillow Block Bearing Units |
| Material Note | Material varies by unit; confirm selected model |
Engineering Drawing
Read the drawing from the mounting interface inward. Check bolt or pilot geometry and shaft centerline first, then compare the remaining lettered dimensions with the same unit row in the catalogue table.
Applications
Conveyors and transfer equipment
For conveyors and transfer equipment, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Fans, blowers and general rotating equipment
UEP is relevant when fans, blowers and general rotating equipment requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Packaging, processing and light industrial machinery
For packaging, processing and light industrial machinery, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Catalogue Dimensional Data
The dimensional data is retained as one complete source table. This is especially useful when adjacent sizes share a housing but differ in shaft, inner-ring or mounting dimensions.
Selection & Integration
Check the dimensions that cannot change on the machine first. Once bolt pattern, centerline or pilot geometry and shaft size are known, the locking and environment details can be used to finish the selection. In this family, the intended role is shaft support on a base parallel to the shaft axis.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter and preferred unit code |
| 2 | center height and base bolt spacing |
| 3 | locking method and shaft condition |
| 4 | operating environment and relubrication access |
The model code should be verified together with its dimensional row. This is particularly important where metric and inch variants share similar housings but differ at the shaft interface.
RFQ Support
Confirm The Exact UEP Configuration
If the existing code is uncertain, send the shaft size and mounting drawing instead. The series can be checked against the catalogue geometry before the quotation is finalized. Ever Power Netherlands Branch can review the quotation basis against the same reference.