UCT300 Take-Up Bearing Units
UCT300 is a heavy duty series configured around take-up bearing units. Its catalogue definition uses setscrew locking, with individual bore and dimensional variants retained in one model table.
Series Overview
This product page groups the complete catalogue series under one title. Engineers can compare the available unit numbers inside the dimensional reference instead of moving between many nearly identical SKU pages.
Series selection works best from the machine interface outward: mounting face, shaft, locking method and finally the exact catalogue line. Related bearing families can be compared from the main bearing index. Browse related bearing families.
Series-Level Selection
UCT300 is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is take-up bearing units, intended for guided shaft support used where position adjustment or belt/chain tensioning is required.
Locking Logic
The catalogue identifies setscrew locking for this series; confirm the exact row before ordering.
Technical Specifications
The table below records the series-level facts visible in the supplied catalogue heading. Model-specific dimensions are deliberately kept in the original dimensional table so values are not detached from their unit numbers.
| Series | UCT300 |
|---|---|
| Catalogue Reference | Part B, page B48 |
| Product Family | Take-Up Bearing Units |
| Duty Classification | Heavy duty |
| Locking / Mounting Method | Setscrew locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | Take-Up Bearing Units |
| Material Note | Material varies by unit; confirm selected model |
Engineering Drawing
The drawing is placed directly before the dimensional reference because installation space is usually the quickest way to rule a series in or out. Match the drawing labels to the corresponding columns in the catalogue table before releasing an RFQ.
Applications
Belt conveyor take-up positions
UCT300 is relevant when belt conveyor take-up positions requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Bucket elevator or chain tensioning points
For bucket elevator or chain tensioning points, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Adjustable material-handling frames
UCT300 is relevant when adjustable material-handling frames requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Catalogue Dimensional Data
All catalogue rows for this family remain together below. Check the chosen bore or accessory code against the drawing letters, then include that exact unit designation in the RFQ.
Selection & Integration
Begin with the machine mounting envelope, then confirm the shaft and locking arrangement. A similar series code does not guarantee the same center height, bolt pattern, cartridge fit, slot geometry or inner-ring dimensions. In this family, the intended role is guided shaft support used where position adjustment or belt/chain tensioning is required.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | take-up slot or guide geometry |
| 3 | required adjustment/travel position |
| 4 | locking method and lubrication access |
Series nomenclature helps narrow the choice, but the final check should be made against the model row and installation data. This avoids treating a nearby bore size or housing variant as interchangeable without verification.
RFQ Support
Confirm The Exact UCT300 Configuration
If the existing code is uncertain, send the shaft size and mounting drawing instead. The series can be checked against the catalogue geometry before the quotation is finalized. Ever Power Netherlands Branch can review the quotation basis against the same reference.