UCPG Tapped Base Pillow Block Bearing Units
UCPG is a standard duty series configured around compact tapped-base housing. Its catalogue definition uses setscrew locking, with individual bore and dimensional variants retained in one model table.
Series Overview
The page keeps the full series together because housing geometry and locking method define the product family more clearly than a single bore size. Exact unit numbers remain in the source table for side-by-side checking.
The series can also be compared with other mounted-bearing families when the machine design is still open. Start from the bearing index, then return to the drawing that best matches the mounting interface. Browse related bearing families.
Series-Level Selection
UCPG is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is compact tapped-base housing, intended for compact shaft support where threaded mounting from the base is preferred.
Locking Logic
The catalogue identifies setscrew locking for this series; confirm the exact row before ordering.
Technical Specifications
Series attributes are separated from model dimensions here. This makes the page easier to scan while keeping the original line-by-line dimensional reference intact below.
| Series | UCPG |
|---|---|
| Catalogue Reference | Part B, page B14 |
| Product Family | Tapped Base Pillow Block Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Setscrew locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | compact tapped-base housing |
| Material Note | Material varies by unit; confirm selected model |
Engineering Drawing
For replacement work, compare the drawing with the installed housing rather than relying on a familiar series code alone. Mounting dimensions and locking details are the better confirmation points.
Applications
Compact machine frames
UCPG is relevant when compact machine frames requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Packaging and handling equipment
For packaging and handling equipment, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Equipment with limited access below the mounting surface
UCPG is relevant when equipment with limited access below the mounting surface requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Catalogue Dimensional Data
The original model table is shown at high resolution so metric and inch unit numbers remain attached to the correct drawing-letter dimensions. Select the row visually and confirm it again in the RFQ.
Selection & Integration
Where several series share a similar housing silhouette, the deciding details are usually locking method, duty class and one or two mounting dimensions. Verify those before comparing the remaining model rows. In this family, the intended role is compact shaft support where threaded mounting from the base is preferred.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | threaded base pattern |
| 3 | center height |
| 4 | locking method and service access |
The supplied catalogue is used here as the technical selection reference. Final quotation review should confirm the exact model, shaft size, mounting interface and any environment-specific requirement.
RFQ Support
Confirm The Exact UCPG Configuration
Include the exact bore or unit suffix whenever possible. A photo of the installed housing and a few fixed mounting dimensions are useful when a legacy code is incomplete. Ever Power Netherlands Branch can review the quotation basis against the same reference.