UCPE Pillow Block Bearing Units
UCPE is a standard duty series configured around solid base housing. Its catalogue definition uses setscrew locking, with individual bore and dimensional variants retained in one model table.
Series Overview
For purchasing and replacement work, the useful decision is the series itself, not a separate web page for every shaft size. The model table therefore stays together so adjacent metric and inch variants can be compared in one place.
Treat the housing format and locking method as the first filter. The broader bearing range is useful when the same shaft size must be checked against another flange, pillow, take-up or insert arrangement. Browse related bearing families.
Series-Level Selection
UCPE is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is solid base housing, intended for shaft support on a base parallel to the shaft axis.
Locking Logic
The catalogue identifies setscrew locking for this series; confirm the exact row before ordering.
Technical Specifications
These specifications describe the family, not a single bore size. Use them to confirm the housing and locking concept, then use the catalogue image for the exact dimensional row.
| Series | UCPE |
|---|---|
| Catalogue Reference | Part B, page B7 |
| Product Family | Pillow Block Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Setscrew locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | solid base housing |
| Material Note | Material varies by unit; confirm selected model |
Engineering Drawing
Check this outline against the machine frame before fixing the bore or unit number. The drawing shows the series geometry; the table below carries the model-by-model dimensions for the same family.
Applications
Conveyors and transfer equipment
For conveyors and transfer equipment, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Fans, blowers and general rotating equipment
UCPE is relevant when fans, blowers and general rotating equipment requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Packaging, processing and light industrial machinery
For packaging, processing and light industrial machinery, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Catalogue Dimensional Data
The original model table is shown at high resolution so metric and inch unit numbers remain attached to the correct drawing-letter dimensions. Select the row visually and confirm it again in the RFQ.
Selection & Integration
For new equipment, select the housing format before finalizing the shaft detail. For replacement work, reverse the process and measure the existing shaft and frame so the catalogue drawing can be matched directly. In this family, the intended role is shaft support on a base parallel to the shaft axis.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter and preferred unit code |
| 2 | center height and base bolt spacing |
| 3 | locking method and shaft condition |
| 4 | operating environment and relubrication access |
The supplied catalogue is used here as the technical selection reference. Final quotation review should confirm the exact model, shaft size, mounting interface and any environment-specific requirement.
RFQ Support
Confirm The Exact UCPE Configuration
Send the current bearing designation and quantity if available. For a new design, provide shaft size and mounting geometry so the family can be checked before a specific unit number is proposed. Ever Power Netherlands Branch can review the quotation basis against the same reference.