TP-SUET Thermoplastic Bearing Units
TP-SUET is a standard duty series configured around thermoplastic take-up housing. Its catalogue definition uses setscrew locking, with individual bore and dimensional variants retained in one model table.
Series Overview
The catalogue treats this as a distinct series, so the page below follows the same logic: choose the series by housing and locking arrangement, then match the exact unit number and dimensions in the supplied table.
If the machine layout is not fixed yet, compare this family with other mounted-bearing formats before choosing the model row. Housing geometry usually narrows the options faster than bore size alone. Browse related bearing families.
Series-Level Selection
TP-SUET is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is thermoplastic take-up housing, intended for corrosion-resistant mounted support using thermoplastic housings.
Environment
Thermoplastic housing; stainless steel insert where stated in catalogue. Confirm the selected insert, seal, grease and cover arrangement for the actual cleaning or corrosion exposure.
Technical Specifications
Series attributes are separated from model dimensions here. This makes the page easier to scan while keeping the original line-by-line dimensional reference intact below.
| Series | TP-SUET |
|---|---|
| Catalogue Reference | Part B, page B86 |
| Product Family | Thermoplastic Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Setscrew locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | thermoplastic take-up housing |
| Material Note | Thermoplastic housing; stainless steel insert where stated in catalogue |
Engineering Drawing
For replacement work, compare the drawing with the installed housing rather than relying on a familiar series code alone. Mounting dimensions and locking details are the better confirmation points.
Applications
Food and beverage handling equipment
TP-SUET is relevant when food and beverage handling equipment requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Washdown-prone conveyors
For washdown-prone conveyors, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Packaging and processing machinery
TP-SUET is relevant when packaging and processing machinery requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Catalogue Dimensional Data
Use this catalogue table for the final unit-number check. It preserves the source row order, dimensional columns and metric/inch alternatives on one reference image.
Selection & Integration
Where several series share a similar housing silhouette, the deciding details are usually locking method, duty class and one or two mounting dimensions. Verify those before comparing the remaining model rows. In this family, the intended role is corrosion-resistant mounted support using thermoplastic housings.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | housing footprint |
| 3 | locking method |
| 4 | cleaning environment, cover and grease requirements |
Before quotation, confirm the source row that matches the required shaft and housing dimensions. Any option not stated for that row should be treated as an RFQ item rather than assumed as standard.
RFQ Support
Confirm The Exact TP-SUET Configuration
Include the exact bore or unit suffix whenever possible. A photo of the installed housing and a few fixed mounting dimensions are useful when a legacy code is incomplete. Ever Power Netherlands Branch can review the quotation basis against the same reference.