TP-SUCFB Thermoplastic Bearing Units
TP-SUCFB is a standard duty series configured around thermoplastic flange bracket. Its catalogue definition uses setscrew locking, with individual bore and dimensional variants retained in one model table.
Series Overview
For purchasing and replacement work, the useful decision is the series itself, not a separate web page for every shaft size. The model table therefore stays together so adjacent metric and inch variants can be compared in one place.
Treat the housing format and locking method as the first filter. The broader bearing range is useful when the same shaft size must be checked against another flange, pillow, take-up or insert arrangement. Browse related bearing families.
Series-Level Selection
TP-SUCFB is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is thermoplastic flange bracket, intended for corrosion-resistant mounted support using thermoplastic housings.
Environment
Thermoplastic housing; stainless steel insert where stated in catalogue. Confirm the selected insert, seal, grease and cover arrangement for the actual cleaning or corrosion exposure.
Technical Specifications
Start with these family-level identifiers before reading across the dimensional table. They are the details most likely to distinguish a neighboring series with a similar overall appearance.
| Series | TP-SUCFB |
|---|---|
| Catalogue Reference | Part B, page B87 |
| Product Family | Thermoplastic Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Setscrew locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | thermoplastic flange bracket |
| Material Note | Thermoplastic housing; stainless steel insert where stated in catalogue |
Engineering Drawing
Read the drawing from the mounting interface inward. Check bolt or pilot geometry and shaft centerline first, then compare the remaining lettered dimensions with the same unit row in the catalogue table.
Applications
Food and beverage handling equipment
For food and beverage handling equipment, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Washdown-prone conveyors
TP-SUCFB is relevant when washdown-prone conveyors requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Packaging and processing machinery
For packaging and processing machinery, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Catalogue Dimensional Data
The dimensional data is retained as one complete source table. This is especially useful when adjacent sizes share a housing but differ in shaft, inner-ring or mounting dimensions.
Selection & Integration
For new equipment, select the housing format before finalizing the shaft detail. For replacement work, reverse the process and measure the existing shaft and frame so the catalogue drawing can be matched directly. In this family, the intended role is corrosion-resistant mounted support using thermoplastic housings.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | housing footprint |
| 3 | locking method |
| 4 | cleaning environment, cover and grease requirements |
The model code should be verified together with its dimensional row. This is particularly important where metric and inch variants share similar housings but differ at the shaft interface.
RFQ Support
Confirm The Exact TP-SUCFB Configuration
Quotation review is more reliable when the request includes the model row, shaft size and installation drawing. Add any corrosion, cleaning or maintenance requirement that could change the configuration. Ever Power Netherlands Branch can review the quotation basis against the same reference.