TP-SUCF Thermoplastic Bearing Units
TP-SUCF is a standard duty series configured around thermoplastic solid-base 4-bolt flange. Its catalogue definition uses setscrew locking, with individual bore and dimensional variants retained in one model table.
Series Overview
The page keeps the full series together because housing geometry and locking method define the product family more clearly than a single bore size. Exact unit numbers remain in the source table for side-by-side checking.
The series can also be compared with other mounted-bearing families when the machine design is still open. Start from the bearing index, then return to the drawing that best matches the mounting interface. Browse related bearing families.
Series-Level Selection
TP-SUCF is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is thermoplastic solid-base 4-bolt flange, intended for corrosion-resistant mounted support using thermoplastic housings.
Environment
Thermoplastic housing; stainless steel insert where stated in catalogue. Confirm the selected insert, seal, grease and cover arrangement for the actual cleaning or corrosion exposure.
Technical Specifications
These specifications describe the family, not a single bore size. Use them to confirm the housing and locking concept, then use the catalogue image for the exact dimensional row.
| Series | TP-SUCF |
|---|---|
| Catalogue Reference | Part B, page B79 |
| Product Family | Thermoplastic Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Setscrew locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | thermoplastic solid-base 4-bolt flange |
| Material Note | Thermoplastic housing; stainless steel insert where stated in catalogue |
Engineering Drawing
Check this outline against the machine frame before fixing the bore or unit number. The drawing shows the series geometry; the table below carries the model-by-model dimensions for the same family.
Applications
Food and beverage handling equipment
For food and beverage handling equipment, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Washdown-prone conveyors
TP-SUCF is relevant when washdown-prone conveyors requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Packaging and processing machinery
For packaging and processing machinery, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Catalogue Dimensional Data
Use this catalogue table for the final unit-number check. It preserves the source row order, dimensional columns and metric/inch alternatives on one reference image.
Selection & Integration
For new equipment, select the housing format before finalizing the shaft detail. For replacement work, reverse the process and measure the existing shaft and frame so the catalogue drawing can be matched directly. In this family, the intended role is corrosion-resistant mounted support using thermoplastic housings.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | housing footprint |
| 3 | locking method |
| 4 | cleaning environment, cover and grease requirements |
Before quotation, confirm the source row that matches the required shaft and housing dimensions. Any option not stated for that row should be treated as an RFQ item rather than assumed as standard.
RFQ Support
Confirm The Exact TP-SUCF Configuration
Send the current bearing designation and quantity if available. For a new design, provide shaft size and mounting geometry so the family can be checked before a specific unit number is proposed. Ever Power Netherlands Branch can review the quotation basis against the same reference.