SSUCPA All Stainless Steel Bearing Units
SSUCPA is a standard duty series configured around all-stainless tapped-base pillow block. Its catalogue definition uses setscrew locking, with individual bore and dimensional variants retained in one model table.
Series Overview
For purchasing and replacement work, the useful decision is the series itself, not a separate web page for every shaft size. The model table therefore stays together so adjacent metric and inch variants can be compared in one place.
Treat the housing format and locking method as the first filter. The broader bearing range is useful when the same shaft size must be checked against another flange, pillow, take-up or insert arrangement. Browse related bearing families.
Series-Level Selection
SSUCPA is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is all-stainless tapped-base pillow block, intended for all-stainless mounted support for corrosion-sensitive equipment.
Environment
All-stainless steel series. Confirm the selected insert, seal, grease and cover arrangement for the actual cleaning or corrosion exposure.
Technical Specifications
Use these identifiers as the first selection gate. They capture the catalogue family, duty, locking and mounting form, while the numerical model rows remain grouped in the source table below.
| Series | SSUCPA |
|---|---|
| Catalogue Reference | Part B, page B112 |
| Product Family | All Stainless Steel Bearing Units |
| Duty Classification | Standard duty |
| Locking / Mounting Method | Setscrew locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | all-stainless tapped-base pillow block |
| Material Note | All-stainless steel series |
Engineering Drawing
When replacing an installed unit, use the outline drawing as a dimensional fingerprint. Match the fixed machine dimensions before relying on a partially legible model code or a visually similar housing.
Applications
Washdown or wet-process equipment
SSUCPA is relevant when washdown or wet-process equipment requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Food-processing and packaging machinery
For food-processing and packaging machinery, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Corrosive-environment conveyors
SSUCPA is relevant when corrosive-environment conveyors requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Catalogue Dimensional Data
The original model table is shown at high resolution so metric and inch unit numbers remain attached to the correct drawing-letter dimensions. Select the row visually and confirm it again in the RFQ.
Selection & Integration
Begin with the machine mounting envelope, then confirm the shaft and locking arrangement. A similar series code does not guarantee the same center height, bolt pattern, cartridge fit, slot geometry or inner-ring dimensions. In this family, the intended role is all-stainless mounted support for corrosion-sensitive equipment.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | housing style and bolt pattern |
| 3 | locking method |
| 4 | environment, cover and lubrication requirements |
The supplied catalogue is used here as the technical selection reference. Final quotation review should confirm the exact model, shaft size, mounting interface and any environment-specific requirement.
RFQ Support
Confirm The Exact SSUCPA Configuration
Share the catalogue unit you are considering plus quantity and the machine drawing. If the unit number is unknown, measured shaft and mounting dimensions can be used to narrow the series first. Ever Power Netherlands Branch can review the quotation basis against the same reference.