SNG500 Plummer Block Bearing Housings
SNG500 is a standard duty series configured around plummer blocks. Its catalogue definition uses see catalogue drawing/table, with individual bore and dimensional variants retained in one model table.
Series Overview
This product page groups the complete catalogue series under one title. Engineers can compare the available unit numbers inside the dimensional reference instead of moving between many nearly identical SKU pages.
Series selection works best from the machine interface outward: mounting face, shaft, locking method and finally the exact catalogue line. Related bearing families can be compared from the main bearing index. Browse related bearing families.
Series-Level Selection
SNG500 is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is plummer blocks, intended for split or pedestal housing support for shafts requiring serviceable bearing-housing arrangements.
Locking Logic
The catalogue identifies see catalogue drawing/table for this series; confirm the exact row before ordering.
Technical Specifications
Start with these family-level identifiers before reading across the dimensional table. They are the details most likely to distinguish a neighboring series with a similar overall appearance.
| Series | SNG500 |
|---|---|
| Catalogue Reference | Part B, page B63 |
| Product Family | Plummer Blocks |
| Duty Classification | Standard duty |
| Locking / Mounting Method | See catalogue drawing/table |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | Plummer Blocks |
| Material Note | Material varies by unit; confirm selected model |
Engineering Drawing
Read the drawing from the mounting interface inward. Check bolt or pilot geometry and shaft centerline first, then compare the remaining lettered dimensions with the same unit row in the catalogue table.
Applications
Belt drives and fans
For belt drives and fans, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Process equipment
SNG500 is relevant when process equipment requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Industrial shafts requiring accessible housing service
For industrial shafts requiring accessible housing service, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Catalogue Dimensional Data
The original model table is shown at high resolution so metric and inch unit numbers remain attached to the correct drawing-letter dimensions. Select the row visually and confirm it again in the RFQ.
Selection & Integration
For new equipment, select the housing format before finalizing the shaft detail. For replacement work, reverse the process and measure the existing shaft and frame so the catalogue drawing can be matched directly. In this family, the intended role is split or pedestal housing support for shafts requiring serviceable bearing-housing arrangements.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter and bearing designation |
| 2 | housing series and center height |
| 3 | seal arrangement |
| 4 | fixed/floating requirement and lubrication method |
The supplied catalogue is used here as the technical selection reference. Final quotation review should confirm the exact model, shaft size, mounting interface and any environment-specific requirement.
RFQ Support
Confirm The Exact SNG500 Configuration
Send the preferred unit number or shaft size with a drawing, quantity and mounting constraints. The catalogue page can then be used as a common reference during quotation. Ever Power Netherlands Branch can review the quotation basis against the same reference.