SBPF200/SBPFT200 Stamped Steel Housed Bearing Units
SBPF200/SBPFT200 is a light duty series configured around pressed/stamped steel 3-bolt flange. Its catalogue definition uses setscrew / eccentric locking, with individual bore and dimensional variants retained in one model table.
Series Overview
The page keeps the full series together because housing geometry and locking method define the product family more clearly than a single bore size. Exact unit numbers remain in the source table for side-by-side checking.
The series can also be compared with other mounted-bearing families when the machine design is still open. Start from the bearing index, then return to the drawing that best matches the mounting interface. Browse related bearing families.
Series-Level Selection
SBPF200/SBPFT200 is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is pressed/stamped steel 3-bolt flange, intended for lightweight housed support using a stamped or pressed steel mounting form.
Locking Logic
The catalogue identifies setscrew / eccentric locking for this series; confirm the exact row before ordering.
Technical Specifications
Start with these family-level identifiers before reading across the dimensional table. They are the details most likely to distinguish a neighboring series with a similar overall appearance.
| Series | SBPF200/SBPFT200 |
|---|---|
| Catalogue Reference | Part B, page B69 |
| Product Family | Stamped Steel Housed Bearing Units |
| Duty Classification | Light duty |
| Locking / Mounting Method | Setscrew / eccentric locking |
| Inner Ring / Bore Form | Wider inner ring / series-specific bore |
| Housing / Configuration | pressed/stamped steel 3-bolt flange |
| Material Note | Stamped steel housing |
Engineering Drawing
Read the drawing from the mounting interface inward. Check bolt or pilot geometry and shaft centerline first, then compare the remaining lettered dimensions with the same unit row in the catalogue table.
Applications
Light conveyors
For light conveyors, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Fans and compact equipment
SBPF200/SBPFT200 is relevant when fans and compact equipment requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Low-mass machine assemblies
For low-mass machine assemblies, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Catalogue Dimensional Data
All catalogue rows for this family remain together below. Check the chosen bore or accessory code against the drawing letters, then include that exact unit designation in the RFQ.
Selection & Integration
A replacement should be checked against measurable interfaces, not appearance alone. Record the shaft size, mounting pattern, centerline or pilot dimensions and the method used to secure the bearing to the shaft. In this family, the intended role is lightweight housed support using a stamped or pressed steel mounting form.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter |
| 2 | mounting-hole pattern |
| 3 | locking method |
| 4 | environment and expected mounting rigidity |
Series nomenclature helps narrow the choice, but the final check should be made against the model row and installation data. This avoids treating a nearby bore size or housing variant as interchangeable without verification.
RFQ Support
Confirm The Exact SBPF200/SBPFT200 Configuration
Quotation review is more reliable when the request includes the model row, shaft size and installation drawing. Add any corrosion, cleaning or maintenance requirement that could change the configuration. Ever Power Netherlands Branch can review the quotation basis against the same reference.