SALP/SBLP Pillow Block Bearing Units
SALP/SBLP is a light duty series configured around pillow block bearing units. Its catalogue definition uses setscrew / eccentric locking, with individual bore and dimensional variants retained in one model table.
Series Overview
The page keeps the full series together because housing geometry and locking method define the product family more clearly than a single bore size. Exact unit numbers remain in the source table for side-by-side checking.
The series can also be compared with other mounted-bearing families when the machine design is still open. Start from the bearing index, then return to the drawing that best matches the mounting interface. Browse related bearing families.
Series-Level Selection
SALP/SBLP is treated as one catalogue series, with individual unit numbers retained inside the dimensional table.
Mounting Form
The primary configuration is pillow block bearing units, intended for shaft support on a base parallel to the shaft axis.
Locking Logic
The catalogue identifies setscrew / eccentric locking for this series; confirm the exact row before ordering.
Technical Specifications
Start with these family-level identifiers before reading across the dimensional table. They are the details most likely to distinguish a neighboring series with a similar overall appearance.
| Series | SALP/SBLP |
|---|---|
| Catalogue Reference | Part B, page B9 |
| Product Family | Pillow Block Bearing Units |
| Duty Classification | Light duty |
| Locking / Mounting Method | Setscrew / eccentric locking |
| Inner Ring / Bore Form | Narrow inner ring |
| Housing / Configuration | Pillow Block Bearing Units |
| Material Note | Material varies by unit; confirm selected model |
Engineering Drawing
Read the drawing from the mounting interface inward. Check bolt or pilot geometry and shaft centerline first, then compare the remaining lettered dimensions with the same unit row in the catalogue table.
Applications
Conveyors and transfer equipment
For conveyors and transfer equipment, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Fans, blowers and general rotating equipment
SALP/SBLP is relevant when fans, blowers and general rotating equipment requires this housing format; verify shaft geometry, mounting interface, operating conditions and environment before final selection.
Packaging, processing and light industrial machinery
For packaging, processing and light industrial machinery, this series provides the catalogue mounting form shown above. Confirm load, speed, shaft dimensions and service environment for the chosen model.
Catalogue Dimensional Data
Use this catalogue table for the final unit-number check. It preserves the source row order, dimensional columns and metric/inch alternatives on one reference image.
Selection & Integration
For replacement work, measure the installed interface before selecting by code. Shaft size is important, but housing geometry and the locking arrangement usually decide whether a unit will fit without rework. In this family, the intended role is shaft support on a base parallel to the shaft axis.
| Step | Information To Confirm |
|---|---|
| 1 | shaft diameter and preferred unit code |
| 2 | center height and base bolt spacing |
| 3 | locking method and shaft condition |
| 4 | operating environment and relubrication access |
Before quotation, confirm the source row that matches the required shaft and housing dimensions. Any option not stated for that row should be treated as an RFQ item rather than assumed as standard.
RFQ Support
Confirm The Exact SALP/SBLP Configuration
Send the preferred unit number or shaft size with a drawing, quantity and mounting constraints. The catalogue page can then be used as a common reference during quotation. Ever Power Netherlands Branch can review the quotation basis against the same reference.