Site icon RP Techniek BV (EVER-POWER GROUP Netherlands Branch)

NUP Series Cylindrical Roller Bearings

ep
Ever Power Netherlands Branch

NUP Series Cylindrical Roller Bearings

The NUP design is commonly used where the shaft needs axial location in both directions in addition to cylindrical-roller radial load capability. This page groups every NUP-prefix model from the cylindrical roller bearing section into one series product and keeps the catalogue values searchable in HTML.

NUP Series Cylindrical Roller Bearings product visualization

Product Overview

This page covers the NUP Series Cylindrical Roller as one catalogue series. Individual part numbers remain inside the technical table instead of being published as separate products. The supplied catalogue is the source of record for dimensions, ratings, speed data and weight shown below.

High Radial Load Format

Cylindrical roller geometry is typically used where radial load capacity and a separable ring arrangement are important.

Speed Data Included

The supplied catalogue publishes grease and oil speed values alongside dimensions and load ratings for many models.

Design Prefix Matters

N, NF, NU, NJ and NUP are treated as separate design series here. Do not substitute one prefix only because dimensions look similar.

Catalogue-First Data

Every listed model is retained under its design prefix, with missing catalogue values left blank rather than guessed.

For the broader range and neighbouring bearing families, visit our bearings catalogue.

Catalogue Specifications

The table is transcribed from the supplied bearing catalogue. It is horizontally scrollable on phones and tablets so model numbers and technical values stay readable without forcing the page beyond the viewport.

Bearing No. d (mm) D (mm) B (mm) Grease Speed (rpm) Oil Speed (rpm) Dynamic Load Rating Static Load Rating Weight (kg)
NUP203E 17 40 12 18000 18000 17.6 14.6 0.009
NUP204E 20 47 14 17000 20000 16.6 13.9 0.109
NUP205E 25 52 15 11000 14000 27.5 26.8 0.148
NUP206E 30 62 16 8500 11000 36 35.6 0.22
NUP207E 35 72 17 7500 9500 46.5 48 0.344
NUP208E 40 80 18 7000 9000 51.5 53 0.39
NUP209E 45 85 19 6300 8000 58.5 63.8 0.52
NUP210E 50 90 20 6000 7500 61.2 69.2 0.56
NUP211E 55 100 21 5300 6700 80.2 95.5 0.62
NUP212E 60 110 22 5000 6300 89.8 102 0.84
NUP213E 65 120 23 4500 5600 102 118 1.05
NUP214E 70 125 24 4300 5300 112 135 1.29
NUP215E 75 130 25 4000 5000 125 155 1.45
NUP216E 80 140 26 3800 4800 132 165 1.74
NUP217E 85 150 28 3600 4500 158 192 2.08
NUP218E 90 160 30 3400 4300 170 203 2.5
NUP220E 100 180 34 3000 3800 208 226 3.14
NUP221E 105 190 36 2800 3600 224 238 4
NUP222E 110 200 38 2600 3400 239 342 5.11
NUP224E 120 215 40 2200 3000 247 249 6.32
NUP226E 130 230 40 2000 2800 358 372 7.38
NUP228E 140 250 42 1800 2400 302 415 9.01
NUP303E 17 47 14 13000 15000 24.646 24.164 0.1387
NUP304E 20 52 15 14000 17000 23.1 19.2 0.149
NUP305E 25 62 17 9000 12000 38.5 35.8 0.24
NUP306E 30 72 19 8000 10000 49.2 48.2 0.38
NUP307E 35 80 21 7000 9000 62 63.2 0.49
NUP308E 40 90 23 6300 8000 76.8 7718 0.65
NUP309E 45 100 25 5600 7000 93 98 0.95
NUP310E 50 110 27 5300 6700 105 112 1.2
NUP310ENV 50 110 27 5300 6700 105 112 1.23
NUP311E 55 120 29 4800 6000 128 138 1.61
NUP311EM 55 120 29 4800 6000 128 138 1.7
NUP311ENV 55 120 29 3200 4500 163.4 178.9 1.54
NUP312E 60 130 31 4500 5600 142 155 1.94
NUP312EM 60 130 31 4500 5600 142 155 2.07
NUP313E 65 140 38 4000 5000 170 188 2.42
NUP313EM 65 140 53 4000 5000 170 188 2.58
NUP314E 70 150 35 3800 4800 195 220 2.9
NUP314EK 70 150 55 2900 3700 216.4 254.1 3.02
NUP314EMN 70 150 35 3800 4800 195 220 3.98
NUP315E 75 160 37 3600 4500 228 260 3.59
NUP315EM 75 160 37 3600 4500 228 260 3.88
NUP315ENP 75 160 37 3000 4000 239.3 284.9 4.05
NUP316E 80 170 39 3400 4300 245 270 3.9
NUP316EM 80 170 39 3400 4300 245 270 43
NUP317E 85 180 41 3200 4000 265 280 5.2
NUP2203EM 17 40 16 16000 18000 24 22 0.095
NUP2204EM 20 47 18 15000 18000 22.2 20.3 0.141
NUP2205EM 25 52 18 10000 14000 23.7 22.8 0.168
NUP2206EM 30 62 20 7500 11000 23.9 33.1 0.3
NUP2207EM 35 72 23 6500 9500 49 51.2 0.45
NUP2208EM 40 80 23 6000 9000 58.3 62 0.49
NUP2209EM 45 85 23 5300 8000 61.4 67.8 0.54
NUP2210EM 50 90 23 5000 7500 64.2 73.6 0.65
NUP2211EM 55 100 25 4300 6700 75.3 87.2 0.77
NUP2212EM 60 110 28 4000 6300 101 123 1.09
NUP2213EM 65 120 31 3500 5600 120 149 1.55
NUP2214EM 70 125 31 3300 5300 119 151 1.7
NUP2215EM 75 130 31 3000 5000 135 172 1.8
NUP2216EM 80 140 33 2800 4800 148 186 2.2
NUP2217EM 85 150 36 2600 4500 169 218 2.8
NUP2218EM 90 160 40 2400 4300 207 265 3.6
NUP2219EM 95 170 43 2200 4000 230 298 43
NUP2220EM 100 180 46 2000 3800 259 338 5.99
NUP2222EM 110 200 53 1600 3400 334 442 8.7
NUP2307EM 35 80 31 7000 9000 64.4 65.7 0.9
NUP2308EM 40 90 33 6300 8000 82.2 88 1.1
NUP2309EM 45 100 36 5600 7000 106 113 1.51
NUP2310EM 50 110 40 5300 6700 128 142 2.01
NUP2311EM 55 120 43 4800 6000 148 162 2.8

Catalogue source pages: 26–34. Values and units are reproduced from the supplied catalogue. Missing fields remain blank/—; no missing value is estimated.

Catalogue table excerpt used as a visual cross-check; the searchable HTML table above contains the extracted data.

Selection Notes

Confirm the part number

Use the complete design prefix and suffix because flange arrangement and construction can change the locating function.

Match the duty

Review both the load rating and the catalogue grease/oil speed lines against the real operating condition.

Check installation inputs

Confirm shaft/housing fits, axial displacement requirement, clearance and lubrication during RFQ.

AI-generated presentation visual based on the supplied bearing reference material; not a dimensional reference.

Typical Applications

These bearings are used in industrial shafts, gearboxes, machine tools, motors and other rotating equipment where radial load and axial-location strategy must be considered together. Confirm the bearing arrangement, not only the envelope dimensions.

RFQ Information

Send the catalogue part number, required quantity, shaft/bore requirement, operating speed, radial/axial load information and any fit or sealing requirement. If the source table contains a blank field, our team can confirm it before quotation.

Request a QuoteEmail: sales@netherlandsdrive.com

Exit mobile version