Site icon RP Techniek BV (EVER-POWER GROUP Netherlands Branch)

NU Series Cylindrical Roller Bearings

ep
Ever Power Netherlands Branch

NU Series Cylindrical Roller Bearings

The NU design is commonly used for non-locating positions and can accommodate axial displacement of the shaft relative to the housing in both directions. This page groups every NU-prefix model from the cylindrical roller bearing section into one series product and keeps the catalogue values searchable in HTML.

NU Series Cylindrical Roller Bearings product visualization

Product Overview

This page covers the NU Series Cylindrical Roller as one catalogue series. Individual part numbers remain inside the technical table instead of being published as separate products. The supplied catalogue is the source of record for dimensions, ratings, speed data and weight shown below.

High Radial Load Format

Cylindrical roller geometry is typically used where radial load capacity and a separable ring arrangement are important.

Speed Data Included

The supplied catalogue publishes grease and oil speed values alongside dimensions and load ratings for many models.

Design Prefix Matters

N, NF, NU, NJ and NUP are treated as separate design series here. Do not substitute one prefix only because dimensions look similar.

Catalogue-First Data

Every listed model is retained under its design prefix, with missing catalogue values left blank rather than guessed.

For the broader range and neighbouring bearing families, visit our bearings catalogue.

Catalogue Specifications

The table is transcribed from the supplied bearing catalogue. It is horizontally scrollable on phones and tablets so model numbers and technical values stay readable without forcing the page beyond the viewport.

Bearing No. d (mm) D (mm) B (mm) Grease Speed (rpm) Oil Speed (rpm) Dynamic Load Rating Static Load Rating Weight (kg)
NU204E 20 47 14 17000 20000 16.6 13.9 0.109
NU205E 25 52 15 11000 14000 27.5 26.8 0.148
NU206E 30 62 16 8500 11000 36 35.6 0.22
NU207E 35 72 17 7500 9500 46.5 48 0.344
NU208E 40 80 18 7000 9000 51.5 53 0.39
NU209E 45 85 19 6300 8000 58.5 63.8 0.52
NU210E 50 90 20 6000 7500 61.2 69.2 0.56
NU211E 55 100 21 5300 6700 80.2 95.5 0.62
NU212E 60 110 22 5000 6300 89.8 102 0.84
NU213E 65 120 23 4500 5600 102 118 1.05
NU214E 70 125 24 4300 5300 112 135 1.29
NU215E 75 130 25 4000 5000 125 155 1.45
NU216E 80 140 26 3800 4800 132 165 1.74
NU217E 85 150 28 3600 4500 158 192 2.08
NU218E 90 160 30 3400 4300 170 203 2.5
NU219E 95 170 32 3200 4000 192 214 2.8
NU220E 100 180 34 3000 3800 208 226 3.14
NU221E 105 190 36 2800 3600 224 238 4
NU222E 110 200 38 2600 3400 239 342 5.11
NU224E 120 215 40 2200 3000 247 249 6.32
NU226E 130 230 40 2000 2800 358 372 7.38
NU228E 140 250 42 1800 2400 302 415 9.01
NU303E 17 47 14 13000 15000 24.646 24.164 0.1387
NU304E 20 52 15 14000 17000 23.1 19.2 0.149
NU305E 25 62 17 9000 12000 38.5 35.8 0.24
NU306E 30 72 19 8000 10000 49.2 48.2 0.38
NU308E 40 90 23 6300 8000 76.8 7718 0.65
NU309E 45 100 25 5600 7000 93 98 0.95
NU310E 50 110 27 5300 6700 105 112 1.2
NU311E 55 120 29 4800 6000 128 138 1.61
NU311EM 55 120 29 4800 6000 128 138 1.7
NU312E 60 130 31 4500 5600 142 155 1.94
NU312EM 60 130 31 4500 5600 142 155 2.07
NU313EM 65 140 53 4000 5000 170 188 2.58
NU314E 70 150 35 3800 4800 195 220 2.9
NU314EM 70 150 35 3800 4800 195 220 3.04
NU315E 75 160 37 3600 4500 228 260 3.59
NU315EM 75 160 37 3600 4500 228 260 3.88
NU316E 80 170 39 3400 4300 245 270 3.9
NU316EM 80 170 39 3400 4300 245 270 43
NU317E 85 180 41 3200 4000 265 280 5.2
NU317EM 85 180 41 3200 4000 265 280 5.25
NU2203EM 17 40 16 16000 18000 24 22 0.095
NU2204EM 20 47 18 15000 18000 22.2 20.3 0.141
NU2205EM 25 52 18 10000 14000 23.7 22.8 0.168
NU2206EM 30 62 20 7500 11000 23.9 33.1 0.3
NU2207EM 35 72 23 6500 9500 49 51.2 0.45
NU2208EM 40 80 23 6000 9000 58.3 62 0.49
NU2209EM 45 85 23 5300 8000 61.4 67.8 0.54
NU2210EM 50 90 23 5000 7500 64.2 73.6 0.65
NU2211EM 55 100 25 4300 6700 75.3 87.2 0.77
NU2212EM 60 110 28 4000 6300 101 123 1.09
NU2213EM 65 120 31 3500 5600 120 149 1.55
NU2214EM 70 125 31 3300 5300 119 151 1.7
NU2215EM 75 130 31 3000 5000 135 172 1.8
NU2216EM 80 140 33 2800 4800 148 186 2.2
NU2217EM 85 150 36 2600 4500 169 218 2.8
NU2218EM 90 160 40 2400 4300 207 265 3.6
NU2219EM 95 170 43 2200 4000 230 298 43
NU2220EM 100 180 46 2000 3800 259 338 5.99
NU2222EM 110 200 53 1600 3400 334 442 8.7
NU2305EM 25 62 24 9000 12000 42.7 40.9 0.4
NU2308EM 40 90 33 6300 8000 82.2 88 1.1
NU2309EM 45 100 36 5600 7000 106 113 1.51
NU2310EM 50 110 40 5300 6700 128 142 2.01
NU2311EM 55 120 43 4800 6000 148 162 2.8
NU2312EM 60 130 46 4500 5600 168 188 3.38

Catalogue source pages: 26–34. Values and units are reproduced from the supplied catalogue. Missing fields remain blank/—; no missing value is estimated.

Catalogue table excerpt used as a visual cross-check; the searchable HTML table above contains the extracted data.

Selection Notes

Confirm the part number

Use the complete design prefix and suffix because flange arrangement and construction can change the locating function.

Match the duty

Review both the load rating and the catalogue grease/oil speed lines against the real operating condition.

Check installation inputs

Confirm shaft/housing fits, axial displacement requirement, clearance and lubrication during RFQ.

AI-generated presentation visual based on the supplied bearing reference material; not a dimensional reference.

Typical Applications

These bearings are used in industrial shafts, gearboxes, machine tools, motors and other rotating equipment where radial load and axial-location strategy must be considered together. Confirm the bearing arrangement, not only the envelope dimensions.

RFQ Information

Send the catalogue part number, required quantity, shaft/bore requirement, operating speed, radial/axial load information and any fit or sealing requirement. If the source table contains a blank field, our team can confirm it before quotation.

Request a QuoteEmail: sales@netherlandsdrive.com

Exit mobile version