Site icon RP Techniek BV (EVER-POWER GROUP Netherlands Branch)

N Series Cylindrical Roller Bearings

ep
Ever Power Netherlands Branch

N Series Cylindrical Roller Bearings

The N design is commonly used as a non-locating cylindrical roller bearing arrangement that permits axial displacement of the shaft relative to the housing in both directions. This page groups every N-prefix model from the cylindrical roller bearing section into one series product and keeps the catalogue values searchable in HTML.

N Series Cylindrical Roller Bearings product visualization

Product Overview

This page covers the N Series Cylindrical Roller as one catalogue series. Individual part numbers remain inside the technical table instead of being published as separate products. The supplied catalogue is the source of record for dimensions, ratings, speed data and weight shown below.

High Radial Load Format

Cylindrical roller geometry is typically used where radial load capacity and a separable ring arrangement are important.

Speed Data Included

The supplied catalogue publishes grease and oil speed values alongside dimensions and load ratings for many models.

Design Prefix Matters

N, NF, NU, NJ and NUP are treated as separate design series here. Do not substitute one prefix only because dimensions look similar.

Catalogue-First Data

Every listed model is retained under its design prefix, with missing catalogue values left blank rather than guessed.

For the broader range and neighbouring bearing families, visit our bearings catalogue.

Catalogue Specifications

The table is transcribed from the supplied bearing catalogue. It is horizontally scrollable on phones and tablets so model numbers and technical values stay readable without forcing the page beyond the viewport.

Bearing No. d (mm) D (mm) B (mm) Grease Speed (rpm) Oil Speed (rpm) Dynamic Load Rating Static Load Rating Weight (kg)
N204E 20 47 14 17000 20000 16.6 13.9 0.109
N205E 25 52 15 11000 14000 27.5 26.8 0.148
N206E 30 62 16 8500 11000 36 35.6 0.22
N207E 35 72 17 7500 9500 46.5 48 0.344
N208E 40 80 18 7000 9000 51.5 53 0.39
N209E 45 85 19 6300 8000 58.5 63.8 0.52
N210E 50 90 20 6000 7500 61.2 69.2 0.56
N211E 55 100 21 5300 6700 80.2 95.5 0.62
N212E 60 110 22 5000 6300 89.8 102 0.84
N213E 65 120 23 4500 5600 102 118 1.05
N214E 70 125 24 4300 5300 112 135 1.29
N215E 75 130 25 4000 5000 125 155 1.45
N216E 80 140 26 3800 4800 132 165 1.74
N217E 85 150 28 3600 4500 158 192 2.08
N218E 90 160 30 3400 4300 170 203 2.5
N219E 95 170 32 3200 4000 192 214 2.8
N220E 100 180 34 3000 3800 208 226 3.14
N221E 105 190 36 2800 3600 224 238 4
N222E 110 200 38 2600 3400 239 342 5.11
N224E 120 215 40 2200 3000 247 249 6.32
N226E 130 230 40 2000 2800 358 372 7.38
N228E 140 250 42 1800 2400 302 415 9.01
N303E 17 47 14 13000 15000 24.646 24.164 0.1387
N304E 20 52 15 14000 17000 23.1 19.2 0.149
N305E 25 62 17 9000 12000 38.5 35.8 0.24
N306E 30 72 19 8000 10000 49.2 48.2 0.38
N307E 35 80 21 7000 9000 62 63.2 0.49
N308E 40 90 23 6300 8000 76.8 7718 0.65
N309E 45 100 25 5600 7000 93 98 0.95
N310E 50 110 27 5300 6700 105 112 1.2
N311E 55 120 29 4800 6000 128 138 1.61
N311EM 55 120 29 4800 6000 128 138 1.7
N312E 60 130 31 4500 5600 142 155 1.94
N312EM 60 130 31 4500 5600 142 155 2.07
N313E 65 140 38 4000 5000 170 188 2.42
N313EM 65 140 53 4000 5000 170 188 2.58
N314E 70 150 35 3800 4800 195 220 2.9
N314EM 70 150 35 3800 4800 195 220 3.04
N315E 75 160 37 3600 4500 228 260 3.59
N315EM 75 160 37 3600 4500 228 260 3.88
N316E 80 170 39 3400 4300 245 270 3.9
N316EM 80 170 39 3400 4300 245 270 43
N317E 85 180 41 3200 4000 265 280 5.2
N317EM 85 180 41 3200 4000 265 280 5.25
N2203EM 17 40 16 16000 18000 24 22 0.095
N2204EM 20 47 18 15000 18000 22.2 20.3 0.141
N2205EM 25 52 18 10000 14000 23.7 22.8 0.168
N2206EM 30 62 20 7500 11000 23.9 33.1 0.3
N2207EM 35 72 23 6500 9500 49 51.2 0.45
N2208EM 40 80 23 6000 9000 58.3 62 0.49
N2209EM 45 85 23 5300 8000 61.4 67.8 0.54
N2210EM 50 90 23 5000 7500 64.2 73.6 0.65
N2211EM 55 100 25 4300 6700 75.3 87.2 0.77
N2212EM 60 110 28 4000 6300 101 123 1.09
N2213EM 65 120 31 3500 5600 120 149 1.55
N2214EM 70 125 31 3300 5300 119 151 1.7
N2215EM 75 130 31 3000 5000 135 172 1.8
N2216EM 80 140 33 2800 4800 148 186 2.2
N2217EM 85 150 36 2600 4500 169 218 2.8
N2218EM 90 160 40 2400 4300 207 265 3.6
N2219EM 95 170 43 2200 4000 230 298 43
N2220EM 100 180 46 2000 3800 259 338 5.99
N2222EM 110 200 53 1600 3400 334 442 8.7
N2302EM 15 35 18 12000 14000 31.9 32 0.185
N2303EM 17 47 21 13000 15000 33 30 0.245
N2305EM 25 62 24 9000 12000 42.7 40.9 0.4
N2306EM 30 72 27 8000 10000 51.4 50.8 0.6
N2309EM 45 100 36 5600 7000 106 113 1.51
N2310EM 50 110 40 5300 6700 128 142 2.01
N2312EM 60 130 46 4500 5600 168 188 3.38

Catalogue source pages: 26–34. Values and units are reproduced from the supplied catalogue. Missing fields remain blank/—; no missing value is estimated.

Catalogue table excerpt used as a visual cross-check; the searchable HTML table above contains the extracted data.

Selection Notes

Confirm the part number

Use the complete design prefix and suffix because flange arrangement and construction can change the locating function.

Match the duty

Review both the load rating and the catalogue grease/oil speed lines against the real operating condition.

Check installation inputs

Confirm shaft/housing fits, axial displacement requirement, clearance and lubrication during RFQ.

AI-generated presentation visual based on the supplied bearing reference material; not a dimensional reference.

Typical Applications

These bearings are used in industrial shafts, gearboxes, machine tools, motors and other rotating equipment where radial load and axial-location strategy must be considered together. Confirm the bearing arrangement, not only the envelope dimensions.

RFQ Information

Send the catalogue part number, required quantity, shaft/bore requirement, operating speed, radial/axial load information and any fit or sealing requirement. If the source table contains a blank field, our team can confirm it before quotation.

Request a QuoteEmail: sales@netherlandsdrive.com

Exit mobile version