Deutz 0510615333 Tractor Hydraulic Gear Pump Replacement

What the part number resolves

When an original unit has been changed before, the tractor badge can be misleading. Use the physical unit carrying 0510615333 and its drive-end photograph as the starting point.

No specific tractor serial ranges are established here for 0510615333. Use the parts manual and existing hardware to complete the application check.

Technical specifications

Capacity under machine load

0510615333 carries a 16.0 ml/rev displacement entry. This is not a stand-alone guarantee of a required lift speed; the working rpm and load-dependent losses remain system-specific.

Within the comparison set, FL912-913 / 19 cc lists 19.0 ml/rev and 175 bar. That is a useful limit check for the 0510615333 hydraulic request, not permission to alter the tractor’s original pump rating.

Controlled flow is shown as 6.0 L/min for this listing. Its circuit function should be reviewed before specifying a valve or control setting.

The stated speed is 600–3200 rpm. Before commissioning, verify the engine accessory drive ratio and that normal operating conditions do not exceed this listing.

Connection geometry and handedness

Even a correct cross-reference can fail if the drive turns the wrong way. The 0510615333 listing indicates counterclockwise, so trace the machine’s drive direction before use.

For hose matching, write down both port specifications: feed Ø20, discharge Ø15. Thread class and sealing face matter as much as nominal size.

Cross-reference comparison

Deutz FL912-913 / 19 cc appears in the same broad product range. Compared with its 19.0 ml/rev displacement, the 16.0 ml/rev for 0510615333 is not enough to establish replacement suitability.

When two options remain, request front and side views of the actual units rather than treating parts-list overlap as a full approval.

Preventing a repeat failure

Inspect the hydraulic reservoir and filter when changing to 0510615333. Recording the original failure symptoms and checking a blocked feed line may prevent an immediate second failure.

Make the clockwise/counterclockwise check explicit in the workshop instruction: 0510615333 is CCW.

Complete the pump identification

For 0510615333, the most useful RFQ attachments are a shaft-end image, a drawing of the fastening pattern and the existing hose connector specification.

Let the quotation identify any uncertainties in compatibility before manufacturing begins.

Technical questions from buyers

Is the Deutz tractor name sufficient for ordering?

No. Confirm the exact pump removed from the tractor, its drive-side rotation and its connection geometry.

Is the 6.0 L/min controlled-flow value the total pump flow?

Not necessarily; controlled-flow information is separate from geometric displacement and actual delivery.

Ordering, samples and shipping terms

Order quantities are set according to pump type and total order value. A small order of 1–2 pieces can be considered at a higher unit price; new customers may request 1–5 samples when the item is suitable. Mixed-model orders are available, normally with a combined order value of approximately USD 1,500.

Typical production schedules are 10–25 working days for standard items, 20–45 working days for customized components, and 45–120 working days for project equipment. Usual delivery terms are EXW, FOB, CIF and DAP. FCA, CFR, CPT, CIP and DDP can be discussed for specific shipments. Confirm the final schedule and terms with the quotation.