Taper lock pulleys

Ever-power Taper-Lock pulleys are flangeless for clean, compact application. They are designed with an 8° taper and a flush-mounted design with no protruding parts providing protected locking and elimination of wobble. In addition, Dodge Taper-Lock® bushings can be found with an optional Diamond D® integral type in popular sizes for a far more precise fit.
Product Features
Stock sizes available up to 12” shaft diameter
Globally acceptance and availability inch and metric bores
Flush Mounting-No Protruding Parts
Easy On/Easy Off design
Materials available in sintered steel, cast iron, ductile iron, steel and stainless steel

Re-borable bushings available for special bores or important seats, spline broaching.
Common Applications

Air Handling





common applications
Any application that will require mounting of something on a shaft
Bushings are essential elements to mount Dodge mechanical drive components:
V-belt drives
synchronous drives
roller chain drives

Notes:
Fits SPA section V Belt
The Taper-Lock pulley size is defiined by 4 digits representing two numbers. The initial two digits represent the maximum bore size and the second two digits represent the bushing duration. For example, product number 1008 has a max bore of just one 1.0″ and a total amount of 0.8″
” bore sizes are specified with the complete inch followed by the fraction. For example a 1.5″ diameter bore would be 1-1/2. Metric bore sizes are designated with “MM” after the metric dimension (X 25MM). These bushings are easy to install and remove, these bushings match flush into tapered bushing sprockets and or pulleys. The bushing contacts and wedges inward, gripping the shaft and bore of the sprocket. Bushings possess an 8° taper, are constructed with steel and have a black oxide coating.

Specs :
Pitch Diameter: 75mm
Outside Diameter: 80.5mm
No of Rows: 2
Bush Size: 1108
Maximum Bore Size: 28mm / 1.1/8
Material: Cast Iron