All EPT shaft collars, including quick-clamping collars, are solo point faced to ensure perpendicularity and proper alignment. This critical manufacturing stage assures precise shaft collar confront to bore relationship resulting in correct component positioning on the shaft and possibly pressure on interfaced ingredients.
Quick-clamping shaft collars from EPT are manufactured from high quality metal with type-II sulfuric anodized finishes, with a dark-colored finish on the collar and a gold finish in the clamping lever for added visibility. Aluminum collars are corrosion resilient, lighter than various other metals, have low inertia and have non-magnetic properties. All EPT goods will be RoHS and REACH compliant. Available typical sizes for the quick-clamping shaft collars happen to be 0.375” to at least one 1.5” in the in . series and 8 mm to 38 mm in the metric series.
Shaft Collar, Program of Measurement Inches, Shaft Locking Type – Couplings 1 Piece Speedy Clamp, Bore Type – Collars Plain Bore, Bore Dia. 3/8 In., Material – Collars Black Anodized 6061 Aluminum, Outside the house Dia. 1-1/2 In., Width .394 In., Clearance Dia. 1.496 In., Screw Size M3, Screw Material 18-8 300 Series Stainless Steel, Operating Temp. Selection -40 Degrees to 200 Degrees F, Specifications RoHS2 Compliant, REACH Compliant
The Shaft Collar 1×3/8, 1/2″ for Key Shaft is made of lightweight Aluminum, the two piece design permits you 
to install these collars anywhere on a shaft without removing components. In addition to reducing the entire weight, the flats enable you to rotate a shaft without marring or gouging the shaft. Basically place the collar on the shaft and tighten both socket-brain cap screws to protected the collar and a wrench and be positioned on the collar’s flats to rotate the whole shaft/collar assembly.
Manufactured from lightweight Aluminum
Lets you install these collars anywhere on a shaft without removing components
Basically place the collar on the shaft and tighten the two socket-head cap screws to secure the collar
Flats enable you to rotate a shaft without marring
Climax Part C-056-S Arranged Screw Collar is made with T303 STAINLESS, which works well in corrosive environments. Shaft Clamp china Dimensions will be 9/16 in. Bore, 1 in. OD, 7/16 in. Width. It really is powerful on hard and soft shafts. It is a Cost effective collar design, and Easily installed where key disassembly would usually be required.
EPT speedy clamping shaft collars collar clamp hinge purchase manufacturing 2 1 8 in steel,shaft collar clamp pressure manufacturing metal vex clamping design,vex clamping shaft collar collars 1 piece with lever clamp hinge,vex clamping shaft collar clamp 3d model production quick 1 3 8 in alum,EPT quick clamping shaft collars collar clamp 2pc 1 in steel stainless split with lever,climax steel s shaft collar two part clamp style EPT quick clamping collars 2computer 1 in steel drive,clamp upon shaft collars couplings universal clamping collar design and style with mounting holes 2pc 1 in steel,shaft collar clamp drive clamping calculation quick connect collars at best value in,clamp shaft collar clamping collars force calculation quick connect,stainless steel double split shaft collar with speedy clamping clamp hinge pressure calculation.
Black Oxide Plated Metal One-Piece Clamping Collar.
Recessed Screw Head provides an outside surface free from key projections for safety.
Design completely engages the shaft without marring.
Greater axial holding ability than set screw collars.
Effective on hard & gentle shafts.
Indefinitely adjustable and simple to remove, one-piece clamping collars are usually applied to hard or smooth standard round shafts, over a split hub or about thin wall tube. Through the use of friction to provide superior grip on bars and shafts, solo split collars offer sturdier, more trustworthy results when compared to the set screw design of solid collars. They also offer tremendous axial electrical power, while minimizing shaft distortion for superior performance and decreased wear and tear.
The collar clamping mechanism works quickly and effectively with simple palm opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the external surface area of the collar. The design of the cam on the lever and the mating machined surface on the collar assure a tight fit with a maximum axial load of 35 to 120 lbs / 133 to 489 N based on the collar bore size. In conditions where higher holding vitality is or clamp axial load is necessary, the quick-clamping collar isn’t the recommended decision. EPT offers a total line of industry-leading one-piece and two-piece shaft collars made for these applications.